rancidnsx Posted March 28, 2010 Report Share Posted March 28, 2010 So I bought a used D3 with the bluetooth adapter, however there is no power harness. It can be purchased from Pioneer but its on backorder until May...so I want to make my own. Looking at the picture of the adapter below, I'm assuming the very left pin is +12 constant, middle is nothing, and right side is ground? If anyone can confirm that would be great. Thanks Quote Link to post Share on other sites
VBLUE42 Posted April 13, 2010 Report Share Posted April 13, 2010 Looks like the power harness on the right to me. Quote Link to post Share on other sites
rancidnsx Posted April 27, 2010 Author Report Share Posted April 27, 2010 Correct, but I want to know what the pinout is. I see 3 pins where it is marked power supply, but dont know which is 12v/ground. Quote Link to post Share on other sites
VBLUE42 Posted April 27, 2010 Report Share Posted April 27, 2010 Well if you have the harness, why not just plug it in to the device and go? Quote Link to post Share on other sites
mgwolf Posted August 29, 2010 Report Share Posted August 29, 2010 Did you ever figure this out? I'm in the same situation. I bought a package including a CD-BTB200, but no power cord. I think ground is on the left, middle is unused, and the right pin is 12v power. Is this what you found? Thanks! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.