Remko.me Posted December 9, 2010 Report Share Posted December 9, 2010 Hello All, I have a F920BT EUR version. The problem is when i check the version it says 2.00000, while there is a firmware update 2.0030. I format the SD card, add the folder (update) on the SD card... then put it into my navi.. but it don't work. It does nothing... even a soft reset does not start he update. Anyone got a clue what's wrong? Quote Link to post Share on other sites
VBLUE42 Posted December 9, 2010 Report Share Posted December 9, 2010 Your unit is likely already up to date. Go to the version info screen and hold the tool icon at the top left of the screen. Quote Link to post Share on other sites
Remko.me Posted December 10, 2010 Author Report Share Posted December 10, 2010 When I check the software version it's 2.00000 Quote Link to post Share on other sites
whit27 Posted January 4, 2011 Report Share Posted January 4, 2011 I am having the same issue with my unit. Showing ver. 2.0000 So according to pioneer it needs to be updated. I place the firmware on the SD Card so the AVICZ110 is in the root of the card. I than place it in the radio and the radio reboots right away but after acouple seconds turns on and nothing has been updated and the system info still shows the same ver.# as above. Also I was reading on here that there was a v2.003 but Pioneers website does not have that firmware listed. Was there an issue with it and they went back to 2.002?? Thanks Whit Quote Link to post Share on other sites
VBLUE42 Posted January 5, 2011 Report Share Posted January 5, 2011 If you have 2.0 on your 110 you now have a 120 so you need to be looking under the 120 for updates from now on. And did either of you follow my advice to check for updated firmware in the response from above? Quote Link to post Share on other sites
whit27 Posted January 5, 2011 Report Share Posted January 5, 2011 If you have 2.0 on your 110 you now have a 120 so you need to be looking under the 120 for updates from now on. And did either of you follow my advice to check for updated firmware in the response from above? I have a X920BT and I went into the Settings menu and selected the Service Information Screen. It lists the Version: 02.0000 and my Device #. If this is not the screen that I should be at where would I find this info? Chris Quote Link to post Share on other sites
VBLUE42 Posted January 5, 2011 Report Share Posted January 5, 2011 Once again, read my post above. Quote Link to post Share on other sites
whit27 Posted January 5, 2011 Report Share Posted January 5, 2011 Your unit is likely already up to date. Go to the version info screen and hold the tool icon at the top left of the screen. How do I get to that screen... I said where I was getting the version info from. Aparently I am in the wrong place. I just went thru the PDF for the manual and it was pointing me to where I was... and its not the same place you speak of. Thanks Chris Quote Link to post Share on other sites
VBLUE42 Posted January 5, 2011 Report Share Posted January 5, 2011 It sounds like you are in the right screen. Just follow my instructions for that screen and it should tell what version you have. Quote Link to post Share on other sites
northernmoris Posted January 5, 2011 Report Share Posted January 5, 2011 I have a X920BT and I went into the Settings menu and selected the Service Information Screen. It lists the Version: 02.0000 and my Device #. If this is not the screen that I should be at where would I find this info? Chris From here hold down the tool icon at the top left. Quote Link to post Share on other sites
whit27 Posted January 5, 2011 Report Share Posted January 5, 2011 From here hold down the tool icon at the top left. Thanks I will try this later tonight when I take the truck out... I thought I had pushed down and held the Top Left Tools... But will try it again. Cheers Whit Quote Link to post Share on other sites
whit27 Posted January 6, 2011 Report Share Posted January 6, 2011 Thanks that worked... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.