ermartin Posted March 2, 2007 Report Share Posted March 2, 2007 Has anyone successfully calibrated an N1 screen. I have attempted this for hrs and it never gets any better. will a complete reset help at all ? Quote Link to post Share on other sites
fieldsinv Posted July 12, 2007 Report Share Posted July 12, 2007 Follow the instructions by REMIX2112 posted Nov 2006. I just did it today and it worked. I learned that all you have to do is press (EQ) botton and then (BAND) to go back in the menu. If you are off alot, I found that all need to do is not trace the outer white line. Just place your pointer a cm from the side. I just used a pointer once at the bottom and once at the top. The values changed ok. **It took me 3 times to figure it out.** Quote Link to post Share on other sites
Tone-Dogg Posted August 14, 2007 Report Share Posted August 14, 2007 That still isn't working for me. Is it possible that my screen is just to far gone, or do I need to have the flex cable done first before, I can recal. The screen is stuck in the up position and +- don't work any more. Sorry to highjack the thread Quote Link to post Share on other sites
rford41 Posted March 27, 2009 Report Share Posted March 27, 2009 I ran into the same problems calibrating on the left side. I slightly lifted the plastic along the left edge and used a thin stylus. (consider that there is more screen continues under the edgeing). It worked and I was able to complete the calibration process. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.