diMo Posted March 21, 2007 Report Share Posted March 21, 2007 Hey guys i have a Avic N2 installled in my 2005 bmw 325i and when i go to the vehicle dynamics view it says "not available right now" what wires do i need to connect to what? The shop that did the install says they have no clue how to get it working... i did some searches snd i know i need to splice the purple wire to the VSS but where is it? Thanks in advance! -Dina Quote Link to post Share on other sites
MisFit Posted March 21, 2007 Report Share Posted March 21, 2007 yellow/green, ABS mod or cluster, 26P plug, pin 19 The ABS module is in the rear of the engine compartment. The VSS wire is in pin 34 on the AWD models, and in pin 10 on all others. Quote Link to post Share on other sites
cntrylvr79 Posted March 21, 2007 Report Share Posted March 21, 2007 In the future one post is enough. Quote Link to post Share on other sites
diMo Posted March 21, 2007 Author Report Share Posted March 21, 2007 yellow/green, ABS mod or cluster, 26P plug, pin 19 The ABS module is in the rear of the engine compartment. The VSS wire is in pin 34 on the AWD models, and in pin 10 on all others. Thanks for the quick reply...i have a little electrical experience with my car but i cant really make out what i would have to splice/ connect to what wires? By 10 pin do you mean the 10th pin on the adapter that came with the harness? or is it something in the fuse box? thanks again for the help Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.