mgp777 Posted April 3, 2017 Report Share Posted April 3, 2017 I recently installed a new NEX8200. I also purchased a new SD card and a SMD DD-1 Distortion detector.. The install was in a 2014 F150 using an iDatalink K150 and Maestro RR. The install went well and was able to use the SMD CD and DD-1 to set the gains. Put all my music on the new 96 Gb SD card(formatted NTSF) and SD card music was working great About a week after install went to show a co-worker my new system and when I went to play some music from the SD card, I found it was no longer available. I went to eject but after hitting eject found the screen tilt adjust icons grayed out and the SD and CD eject buttons not functioning. I have tried disconnecting the battery and re-booting. I have removed the K150 panel to make sure it was not binding the eject function. I then re-flashed (using USB with latest firmware) but it is still in the same state. Any idea's? It would be a real hassle to take it out to send in and have to put the old equip back in. Thanks... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.