Here are the updated logo image packs for May 2011. If you wish to make a donation for this effort my paypal is [email protected]. This is not a requirement as I will never charge money for these logo updates nor make conditions regarding their use.

Changes/Improvements/Issues:

- Image table update for all May 2011 XM lineup changes including new channels and channel name/number changes.

- Update of all images from the latest channel guide.

- Sports channels still alternate between "Sports XXX", "NBA XXX" etc. and "Sports Play-By-Play". The logo will only appear if the channel name uses the name with the number in it, i.e. "Sports 190" or "NBA 218", etc. There is no way to avoid this and at this time I still don't know which naming scheme is ideal to associate with the logo.

- There are no category logo updates in this release as all the major categories are covered. I have no source for category images as XM does not provide them.

Installing:

- You will need to know how to modify the media for your particular AVIC series. See the stickied posts in the hacks/mod forum related to your unit for details.

- Locate the folder containing the XMCAT, XMDAT, XMLPS, and XMDPS directory. On the Z series this the AV subdirectory of the SDAT volume. On the F series this was reported to be MyFlashDisk/DATA/XM. On the D/N series these folders are in the root directory of the 2 map DVDs.

- As always when doing such updates on the Z and F series be sure to make backups of your XMCAT, XMDAT, XMLPS, and XMDPS directories.

- Simply copy the files in the pack over any existing files for each directory (XMCAT, XMDAT, XMLPS, and XMDPS). Do not delete any files.

Attached here is Zx series. These have been fully tested on a Z3. This is NOT for the new Zxxx series.

UPDATE REMOVED. NEWER VERSION IS HERE:

http://avic411.com/index.php?/topic/32128-xm-july-16th-logo-updatednfzxzxxx-series/

The F series pack using the standard Pioneer background is here.

UPDATE REMOVED. NEWER VERSION IS HERE:

http://avic411.com/index.php?/topic/32128-xm-july-16th-logo-updatednfzxzxxx-series/

The F series pack using the transparent background look is here.

UPDATE REMOVED. NEWER VERSION IS HERE:

http://avic411.com/index.php?/topic/32128-xm-july-16th-logo-updatednfzxzxxx-series/

The D and N series pack is here. If there is a problem please post back on here as soon as possible so people aren't burning coasters.

UPDATE REMOVED. NEWER VERSION IS HERE:

http://avic411.com/index.php?/topic/32128-xm-july-16th-logo-updatednfzxzxxx-series/

I have the files for the new Zxxx series units. These units use a new image size for the larger logo bitmap of 170x55. Closer examination shows that a unique specialized background is being used for both the large and small images. The logo PNGs are ready for the new size and once I finish pulling clean blank images of the special backgrounds the logo generator can be modified to compile this series in the necessary format and I can post the logo update and update logo generator. I hope to finish this sometime before the end of next week.

Here is first logo update release for the new Zxxx series. This didn't take as long as I expected. Since this is the first attempt at this unit please give feedback on if the background of the logos looks and meshes ok on the AVIC display. The background used for this unit has a 1 pixel border around it and it may be necessary to adjust the logos so they don't touch the border.

UPDATE REMOVED. NEWER VERSION IS HERE:

http://avic411.com/index.php?/topic/32128-xm-july-16th-logo-updatednfzxzxxx-series/

Not finding where it says how to upgrade your dvds, its not a "sticky" that I can find... Ive got a D3 with latest disc.

Vandal, you're awesome.

I can confirm that your Zxxx update works perfectly on my Z130. A few of the logos do touch the border, but it looks fine, certainly nothing to worry about.

Not finding where it says how to upgrade your dvds, its not a "sticky" that I can find... Ive got a D3 with latest disc.

Make an ISO of the DVD, edit it, burn it. Done.

Attached is the updated XM Logo Generator program. This release contains the updated raw logos and default channel mapping for the May 2011 logo update and adds support for the new Zxxx series.

This program takes raw 32-bit transparent PNG logo images by channel number and size and automatically converts them into the special formats used by the various AVIC units. It handles all of the dirty work involving color conversion, handling of special transparent colors and backgrounds specific to each AVIC series, and generation of RGB 555 Bitmap files and/or PIM formatted files with the appropriate LPS/DPS numbered filename.

Using this program you can now edit or create you own logos using Photoshop or any other application without worrying about the technical details or hassles of formatting it for you AVIC unit. The only rules are you must mainting the appropriate image size, keep the bankground transparent (in most cases), and save the logo as a 32-bit PNG.

This program also generates the IMAGETBL.DAT file and allow modification of the channel and category mappings. You can adjust the mappings if you want to restore a logo to a station that has changed its name or find the station ID of a new channel.

All the 1000+ transparent 32-bit PNG source logos that were used to build the 5-2011 logo pack release are included and channel/category logo mapping will default to this release making the program ready to go on start.

This program will be updated with each logo pack release to provide the updated raw logo images and default channel/category mapping information.

Detailed instructions are included that documents everything you could ever want to know about XM logos on the AVIC series.

Note: This program does NOT handle the extraction of the logo images from the XM channel list PDF. That process is still a lengthy manual process using Inkscape to make giant PNG files of the logos in various sizes and then a program that take 20-30 run and requires many tweaks. At this point it is unlikely I will ever be able to make a program that will fully automate that process.

Requirements:

- Windows XP, Vista, 2003 Server, or 2008 Server

- .NET Framework versions 2.0 SP2, 3.0 SP2, and 3.5.

The program will not run if you do not have the sufficient .NET framework versions installed. The above listed Windows versions can be updated with the .NET framework by going to http://update.microsoft.com.

It is recommended that you install the AppleRGB.icc color profile before running the program for the first time as this profile will be set as the default if it is present. To install any of the color profiles simple browse to the "Color Profiles" subdirectory, right click on the profile file and select "Install Profile".

Features/Bug Fixes for this Version:

- Add support for new Zxxx series.

- Fix exception crash if entering a channel name that exceeds the maximum limit. A warning dialog will now appear instead.

- Various Browse buttons now function.

- Tab order has been fixed on the tabs.

UPDATE REMOVED. NEWER VERSION IS HERE:

http://avic411.com/index.php?/topic/32128-xm-july-16th-logo-updatednfzxzxxx-series/

Make an ISO of the DVD, edit it, burn it. Done.

I am doing that, but every time I make it back into an iso the file size is no longer correct. It shouldnt grow larger if Im just replacing existing files of the same size it should stay the same size as the original. I cant figure out what Im doing wrong....

I am doing that, but every time I make it back into an iso the file size is no longer correct. It shouldnt grow larger if Im just replacing existing files of the same size it should stay the same size as the original. I cant figure out what Im doing wrong....

How much larger? It will probably be a few MB's larger. Back when I had a D (until it was stolen) I used Ultra ISO.

Vandal, do you write code or technical documents for a living? It's really great work. I would bet Pioneer's documentation doesn't even come close to yours!

Vandal, do you write code or technical documents for a living? It's really great work. I would bet Pioneer's documentation doesn't even come close to yours!

Software developer, but I do often have to write some kind documents as part of that. In this case I was trying to make the document as complete as possible for non-technical people.

I am doing that, but every time I make it back into an iso the file size is no longer correct. It shouldnt grow larger if Im just replacing existing files of the same size it should stay the same size as the original. I cant figure out what Im doing wrong....

Which file size(s) are you looking at or expecting? You are going to end up with a slightly larger ISO after doing the replace because there are more station logos than previously, plus some obsolete logo files are still going to be present. The individual PIM files in the logo are the same size as the old ones.

I did have a problem with some ISO editing tools in the past with the Pioneer DVD images. You need a tool like Ultra ISO that lets you edit the ISO image contents "in place", you cannot rebuild an new ISO from scratch files or you will lose the needed Pioneer image paramters in place of generic PC based image.

Which file size(s) are you looking at or expecting? You are going to end up with a slightly larger ISO after doing the replace because there are more station logos than previously, plus some obsolete logo files are still going to be present. The individual PIM files in the logo are the same size as the old ones.

 

I did have a problem with some ISO editing tools in the past with the Pioneer DVD images. You need a tool like Ultra ISO that lets you edit the ISO image contents "in place", you cannot rebuild an new ISO from scratch files or you will lose the needed Pioneer image paramters in place of generic PC based image.

OK Ive got the downloaded Pioneer cndv100mt it is the verified correct file size (found info on this site), I open it with ultraiso, use the "add files" to replace the existing files and overwrite them with the new ones then burn disc from ultraiso, is that the wrong way to do it??? What method should I be using??? Thanks for any and all help you can give me.....

I open it with ultraiso, use the "add files" to replace the existing files and overwrite them with the new ones then burn disc from ultraiso

That should work.

Thanks so much for making this. This is such an awesome tool. I do have a question though. I have Z110bt and would love to change the logo background to black. How do I go about doing this? I noticed with the Zx series output it is possible by editing the two files ZXXXLargeBackground.bmp and ZXXXSmallBackground.bmp. I can't seem to generate a black background for the ZXXX series using the Generator.

Thanks.

Well I re burned a disc with ultraiso and it verified as ok, put it in the D3 and it upgraded fine, problem is I still can get the deck to get past the insert appropriate disc, go into service menu and GPS program shows as NG, disc shows version 1.5, pretty sure Im gonna have to send the deck to someone to get fixed... damn it!

Got the update working GREAT in my D3! Thanks Vandal! Not having logo's has been bugging me since the change on May 4, now I have logos! Thanks!

Hello fellow Pioneers...

Is there a way to update the logos in my X920BT with GEX-P920XM XM Satellite Tuner attached to it? And if so which file set to use from the beginning of this post..

Thank you Michael

 

There are no category logo updates in this release as all the major categories are covered. I have no source for category images as XM does not provide them.

 

OK, but will this nuke the *existing* category logos and replace them with blank images? Or will the existing category logos remain unchanged if someone uses this??

Here's an amusing post from the Pioneer Facebook team about if/when THEY would ever provide a channel logo update....not to mention map updates. Pretty disappointing...

"Unfortunately, there is no easy answer for your question.

Channel line-up changes are at the discretion of Sirius-XM. In order to ensure that our GEX-P920XM is backwards compatible with practically any Pioneer "P-bus" radio, our products feature channel artwork that is stored in local memory (as opposed to being received via the same satellite data connection as the audio and text). As a result, although you should be receiving the new channel related text, the artwork for any revised channels is the default universal channel icon.

In the past, we have been able to update channel icon artwork in conjunction with a map software upgrade, however we have not been able to confirm with engineering at this time if it will be possible to include in the 2011 map upgrade (coming this summer) due to the late timing of the channel line-up changes from Sirius-XM.

Please stay tuned for more news regarding the 2011 map software upgrade! Thanks.

These guys are ok out of the gate, but their product support is horrible.

Here are the updated logo image packs for May 2011. If you wish to make a donation for this effort my paypal is [email protected]. This is not a requirement as I will never charge money for these logo updates nor make conditions regarding their use.

 

Changes/Improvements/Issues:

 

- Image table update for all May 2011 XM lineup changes including new channels and channel name/number changes.

 

- Update of all images from the latest channel guide.

 

- Sports channels still alternate between "Sports XXX", "NBA XXX" etc. and "Sports Play-By-Play". The logo will only appear if the channel name uses the name with the number in it, i.e. "Sports 190" or "NBA 218", etc. There is no way to avoid this and at this time I still don't know which naming scheme is ideal to associate with the logo.

 

- There are no category logo updates in this release as all the major categories are covered. I have no source for category images as XM does not provide them.

 

Installing:

 

- You will need to know how to modify the media for your particular AVIC series. See the stickied posts in the hacks/mod forum related to your unit for details.

 

- Locate the folder containing the XMCAT, XMDAT, XMLPS, and XMDPS directory. On the Z series this the AV subdirectory of the SDAT volume. On the F series this was reported to be MyFlashDisk/DATA/XM. On the D/N series these folders are in the root directory of the 2 map DVDs.

 

- As always when doing such updates on the Z and F series be sure to make backups of your XMCAT, XMDAT, XMLPS, and XMDPS directories.

 

- Simply copy the files in the pack over any existing files for each directory (XMCAT, XMDAT, XMLPS, and XMDPS). Do not delete any files.

 

 

Attached here is Zx series. These have been fully tested on a Z3. This is NOT for the new Zxxx series.

 

 

OK, but will this nuke the *existing* category logos and replace them with blank images? Or will the existing category logos remain unchanged if someone uses this??