2005RSX
-
Content Count
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by 2005RSX
-
-
Car: 2005 Acura RSX
I have the pink/white, VSS wire from the head unit, tapped onto the blue/white, on the car circuit, but still the reading is off.
I've checked the "3D calibratin" under the Navi Menu- Hardware Info.
-top half:
Distance: 0 * won't change even driving
Speed Pulse: ** keeps on going up even the car is in idle mode, not traveling
Learning Status: Initializing sensor
-bottom half:
Distance: almost full in signal strength or progress bar ( dont know the term)
Right Turn: nothing here at all
Left Turn: nothing here at all
3D: full detection strength here, the same as 'Distance'
Can somebody please help me figure out what's wrong with it?.. Thank you in advance.
-
2005RSX,
If you used an aftermarket Honda harness for your D3, you should connect the orange wire on the harness to the "Illum" wire on the D3.
Thank you, Superchiu, I did as you said and it worked... thanks again.
-
I have a 2005 RSX, my Day/Night mode does NOT work either....
What wire or wires need to be connected to what. and/or is it just a setting problem.
* under Hardware info/ Connection Status- Illumination shows "OFF"
Please help.
-
My car alarm stops working after the install of my D3.
Can anybody please help me?.. any info would be much appreciated.
"HARBOR SOUND" is the place where I took my car in to have it installed...
I took the car back to ask them what they did to my alarm, you what they told me? "take it to the dealer"_ Avoid that damn place.
-
Can someone please help me figure out as to which wire on the orginal 2005 RSX im suposed to connect the "ILL" wire to???
-On the Harness there's a pin for it, ILL, but there's no matching pin on the other factory OEM connector.
Thanks in advance.
3d calibration problem
in Problems/Troubleshooting
Posted
There isn't any reading at all for the:
-Right Turn
-Left Turn...
*under 3D Calibration.
please help!,, thank you in advance