jeep06

ive been looking at this ipod hook up for my D2 has anyone used it or know if it works well? http://cgi.ebay.com/Alpine-Pioneer-JVC-Video-aux-input-cable-for-iPod-Video_W0QQitemZ170102433084QQihZ007QQcategoryZ60208QQssPageNameZWDVWQQrdZ1QQcmdZViewItem thanxs

its a 2006 Jeep Grand Cheerokee acording to pioneer it still is under warrenty... i dont have time to check everyhting till this weekend but i will post an update if i run into another problem thank-you

MY D2 has been working perfectly with the by pass for 4 months now. All of a sudden one day it would not power up at all when i turned my car on. I unplugged the power harness for an hour or so then tried re pluggin the unit back in and turning on the car however the D2 still does not power on. I checked all my wiring with a volt meter and there is power running through them, however the D2 does nothing when the car is turned on. So is it possible that i blew a fuse in the D2 itself or is this another problem... i called pioneer and the only place that services thier navigation is in

Whenever i am traveling in NYC or Boston for that matter and i have a destination put in the unit... the navigation arrow does not match up with my location it is always a Block to the south/north or block to the eas/west of my position. (it is fine on the major highways but when i get into the city traveling around the blocks where there are buildings it alwasy seems to loose me and re calculate me in the wrong position. Or when i get off off the highways into the city, the arrow seems to slwo down a block south of where i actually am... hope this made sense I have a D2 installed in an

is still need to get some pics of the jeep but here is the mountaineer [url]http://www.cardomain.com/ride/738472[/url]

no ithink that covers it thank you it was a big help and i liek the fiberglassed dash i got a 10inch monitor firberglassed into my mountaineer.

also would anyone know where the speed sensor and reverse gear wires are located (2006 grand cheerokee standard 6 speaker with mp3) thank you

yes when i plugg sumthin into the cig lighter and turn on the a/c it still works... so i have the ACC wire spliced into the cig. lighter wire. is there anyother way..

sorry for the second post but i thought it be easier iwas able to fit the d2 in the din and a half opening for the jeep however the mounting bracket does not extend wide enough for me. Is there anywhere to get a longer bracket or should a i make a make-shift wood one?

i have my ACC wire spliced to my cig. lighter that turns on with the car because the ACC wire from my d2 will not work with the wiring harness. so now everytime i turn on the a/c fan switch(powers up a/c) the navigation powers off. (i believe both the cig. lighter and a/c both connect into the same harness but i am not sure on that did i make a bad connection or something else? thanks

by-pass worked great thankyou

can anyone help me out by explaining how to add a pin and wire to the open slot so i can ground it? thank you

thanks i reconnected it to the cig. lighter and it works. thank you

I have an avic-d2 connected to my 06 grand cherokee however when i first powered it up nothing happened, the unit will not turn on. I double checked my connections and everything is correct. However on the wiring harness i purchesed there were 2 power wires and 2 groud wires does it matter that i connected my d2 to just one of the power wires and one of the gound?