TRIPPLE_F_P

Is there a way to watch video through the Z2 using an I POD other than, running a line to the RCA input???? Thanks! TRIPPLE_F_P

I hear ya!!! You welcome!

If this for the AVIC Z2(??), I had same problem. You might feel a little dumb after I tell you how to fix (as I did LOL!!). Go to your system settings and turn the rear-view cam to on! Good luck! TRIPPLE_F_P

Boy I feel stupid!!! I just went out to my truck and it was off in the system settings. Thanks for your help!!!!

The camera is working, just not displaying properly. All the wires are hooked up correctly (i.e. power, ground, RCA Input). I have had this unit installed for 8 months now with no prob. Today, I installed the bypass CD and just grounded the 2 wires required. I touched nothing else. I don't understand why it, all of a sudden, stops working. Is there a on/off, that might have to be turned on? I had to unplug the unit from the power to ground the appropriate wire. Could this have reset the unit for no rear-view???? Your help is much appreciated! Thanks!!

I just installed the bypass for the Z2. After installation my rear-view camera will not display. I can adjust the contrast, brightness, etc., but it will not display properly. When I put it in reverse nothing happens and it will not let me use the map/rear-view display. Please let me know if this can be fixed. (Is there an on/off for the rear-view?? If so please let me know how to turn it on) Thank you!! TRIPPLE_F_P