dhonzik

Did you check the GPS antenna? It may got pulled out

Did you try upgrading to 1.08?

https://www.pioneerelectronics.com/PUSA/Car/NEX/AVIC-8201NEX#downloads

Network

No, there is not, its a problem with the idatalink RR firmware

https://www.ebay.com/itm/Password-Unlock-Removal-Pioneer-AVIC-AVH-4200nex-5200nex-6200nex-7200nex-8200NEX/222695825806?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D47301%26meid%3Da94c89f0665e4c17b9b62f97fd6aa804%26pid%3D100623%26rk%3D4%26rkt%3D6%26sd%3D131887987550%26itm%3D222695825806&_trksid=p2047675.c100623.m-1

15 hours ago, jerryb said:

so.. what I said was wrong, if you caught it. I did wipe my nexus 5x and it now works with the 8200 and android auto like it did a few months ago. I can't tell you why though.

something in android 8.0 and 8.1 did mess it up though. A fresh reset to 8.1 is fine. Far as i can tell pioneer and android auto work well with my 8200....   android 6.0, 7.1 and 8.0, 8.1

I have a random usb c cord also a 90 degree adaptor then extension, then my C cord, or micro cord. 

I would guess pixel people need a factory wipe and it will work fine. 

 

I have the micro byass, and the long press left corner thing before I tried two fresh phones. Both work fine. 

Can you tell me which micro bypass you used for your AVIC-8200NRX?

Yes, all of them have it, Its a liability statement and all the new units this goes away by itself after 7 seconds

Did you place the usb flash drive in USB1? If you have an SD card you can also run the update from that too

The only con I heard about it takes like 10 seconds to boot up, otherwise it highly recommended.

https://www.caraudionow.com/best-in-dash-gps-navigation/

Mine is sitting in its box getting ready to be installed next weekend along with keyless entry and 4 focal RCX-165 speakers into my 2014 Nissan Versa Note. In the future will probably add an Alpine KTP-445U brick amp to boost the power up to 45W per channel

Hi everyone, new to the forum.

 

I just bought a AVIC-8200nex to switch out my old kenwood headunit on my toyota supra. I have an aftermarket amplifier using RCA cables to the unit which works fine with my old kenwood. I got the harness all set up, plugged in the rca wires to the amplifier and I'm not getting any audio. I though maybe it was a cable or amplifier issue so I bought the 8200nex into the house. I hooked up a 12 volt dc power source and connected it to my home speaker via rca cables and put in a cd and still no sound. Anyone have similar issue or a quick fix or do you guys think i got a bad unit? seems like everything else is working on the unit. any info is appreciated.

This appears to be a common problem, I wonder if there is any software switch that needs to be turned on like the sub-woofer button. I have seen a youtube video that they were installing a Alpine block amp and had the same problem with the RCAs but worked fine thru the wiring harness 

Hi, I just discover this site today while googling for an answer to why the subwoofer on/off setting disappeared from my head unit.

 

Hopefully someone in here could help me.  Not sure when the subwoofer  on/off setting disappeared as I have not needed to make any adjustments lately.  Obviously with the subwoofer off and no setting to turn it back on I cannot adjust anything related to the sub.  I know there was an on/off setting at one point I am just not sure how to get it back.

 

Thank you in advance

 

Don

Did you try reinstalling the firmware?

http://www.pioneerelectronics.com/PUSA/Car/NEX/AVH-4100NEX#downloads

I have a pioneer avh 4000nex ...from the splash screen it goes to a software error screen. does anyone have the image file so i can load it onto the internal sd card

Post deleted