cntrylvr79
-
Content Count
4,614 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by cntrylvr79
-
-
Yes I have though based on your sig, you may have to modify the back of your dash in order to accomodate the addition depth required. That is assuming you have a volkswagon if not then you can ignore what I said.
-
Here's your vss
BROWN/RED IN HARNESS FROM GAUGES -
Yep bluetooth adaptor does not work with any avic other than the z1. I've tried for customers in the past. It doesn't recognize it.
-
THe part # is 99-5802. As for taking it to be installed, might want to talk to whomever you're looking to have put it in first and make sure that they're going to do all that should be done. Such as hooking up the vss, reverse, and illumination. You can also see if they do the bypass for you. I know circuit and best buy cannot do that though.
-
Yeah I must admit after having worked for both boxes now. I am having much more fun at cc than I ever did at bb
-
Odds are then there's another yellow wire in the kick panel. If you've already found it at the tail light might as well just run that up to the front since you now whre it is and the couple minutes it'll take to run that to the front of the truck will be a lot less than trying to find it in the pass kick.
-
Yes it looks stock. As mentioned before the harness and antenna adaptorare chrysler parts. The kit, I'll have to check work tomorrow for the part number but it's a ord double din kit. Actually some of the guys here have probably used it for the newer f150s and such.
-
Should be using the straight orange wire for your illumination. The orange/white may not cause the z1 to switch to night mode properly if the dimmer in the car isn't set just right.
-
the cell mute wire is for if you have a separate handsfree kit installed. A ground pulse from a handsfree kit on that wire will mute the radio until the ground is lifted. I don't beleive that wire is needed for the pioneer bluetooth adaptor, but I can't be 100% sure since I've not gotten to play with one yet.
-
What kind of vehicle is the z1 installed in?
-
First are you burning the cds as regular audio discs? If not that is the problem. The z1 will only record music from a regular audio disc. It will not record mp3s, wmas, etc.
-
Did you use the red wire in that harness? That will cause your problem. Newer chrysler products, like gms, use a dataline to tell the radio when to turn on. What you'll have to do is splice a wire into either the ignition harness or the cig plug that loses power when the key is off to get the avic to turn on and off properly.
-
The flash from the camera makes it hard for me to see the wire colors. But yeah just count the number of spots in the harness be there a wire in it or not. the harness you're looking for will have 20 pins total. Then look for a yellow wire in that harness.
-
Easy way to tell is if you have that white ez pass thing on you windsheild then the gps will work inside the car. If you have one of the ic. plate mounted ez passes then the gps ant will have to be outside of the car.
-
Just wondering how many professional installers there are floating around on this board?
-
Here ya go.
Reverse Lights YELLOW (+) 20 PIN CONN PASS KICK PANEL -
I've tried the 2003 kit, it never worked properly for me, but then again that was in older trailblazers. Maybe the new one is different.
-
To my knowledge poineer doesn't make a single dvd player like what you're looking for. Only the dvd changer.
-
It's a turn off pop coming because you car has a factory amplifier. You can try putting a 300-500 ohm resistor on the remote wire. You best bet would probably be to remove the amp in it's entirety.
-
From what I remember, the vdp will not work at all with the avic series units. I don't think they even registtered that it was connected. Don't remember for sure though we tried it back when that processor first ame out.
-
To make the z1 fit in an 05 You have to cut out some plastic support for the back of the stock radio. As for the kit you can get a metra 99-3301 and just use the side brackets. I've done this several times in Trailblazers up to 05. From what I've seen of the 06 I don't see it bing much different.
-
The n series, d series, and z series are all navtraffic capable. Only the z1 is bluetooth ready.
-
For the harness, I believe it's a 70-1770 which would be the 2 plug ford harness. I'm not 100% positive I know it's either the s or x type that uses that plug.
-
parking brake wire must be grounded. What kind of car do you have?
Speed Pulse numbers?
in Problems/Troubleshooting
Posted