YellowCobaltSS

Ok I have had my deck out for a long time now because I was having problems with it.... When the RCA's from my amp were hooked up to the back of the deck if I moved the wires around at the back, or hit a bump in the road or hitting the top of my dash I would get a bad feedback noise that wouldn't go anyway until I unplugged the RCAs or moved the wires around where the white connectors goes into the dash... This is not only happening when the car is moving.. I can have the truck shut off and it would still do it. So it's not an alternator noise or anything like that. Also just to experime

anyone???

Now I just need to figure out why this noise is happening..

Thanks Much Appreciated

Ok I have this problem for months and I just have had the subwoofer disconnected from the deck not working about it..... Now I wanna hook it back up so I wanna know what problem I am having.... Whenever I go over a pump, hit my dash etc.... I get lots of feedback going into the sub making a very awful sound.... Hence why I disconnected it.. So today I took the deck out to figure out where the noise it coming from... I wiggled the RCA's and nothing... So I start touching the connector going into the deck and sure enough I am pretty sure it is coming from that area... I know if it it's the R

I have a AVIC-Z2 (upgraded to Z3) and a CD-R55 that I just purchased... I want to know if anyone who had this how they have it setup as far as the mode and such goes.. They have AVH, A and B on the modes and then selections of AVH, DVD and TV... Now I have tried different ways but I don't see anyway of clearing the menu screens.. The only way of getting rid of them is by touching the HIDE(X) button on the screen itself.. I was thinking the remote would allow you to do everything that can be done on the touch screen menus.. So basically what I want to know what exactly is the extent of the

I am having problems with my VSS pulse on my 2005 Chevy Silverado.... I got my connection feed from the cluster location A4 and spliced into this and went to the deck's connection.. Well I go reset the Calibration information and it just sit theres in "sensor initializing" and just sits there saying that.. Eventually I will start to get a pickup feed but I believe that this is from the "satellite sensors" and not the VSS because I show no pulse on that screen when I am driving around. On learning status if I am not mistake it ends up saying "Simple Hybrid" .. I would suspect that if the VSS is

Ohhh ya I know my lesson. If buying from unttrusted sources make sure check EVERYTHING or buy from trusted source lol Def need to research things before making online purchases etc... Hopefully I get can get this fix for $125 like quoted (could be $190 depending on what needs to be done). Either way if I can get away with unit cost me about $650 all fix and working I will be happy. Because I see them sell used around me for $600-800.

Ok I know you don't like ebay... but I heard someone on the board here that someone on ebay can service these.. He said his got fixed for $100 (for the laser etc..) so I look up service repair on ebay and I came up with these different people selling service.. They seem to have good feedbaak and 1 year warranty on work and parts.. I know you probably gonna say you don't trust it.. and I know your sending your machine to someone in hopes it will come back to you.. I think there is protected on ebay etc.. for things like this.. http://cgi.ebay.ca/Repair-Fix-Service-Pioneer-AVIC-D1-D2-Z1

Ok so repair cost is $550 unit price after selling cd changer player cost is $450. So is $1000 into a used Z2 worth it??? I wouldn't be upgrading after this deck for a very long time I don't know much I would get from it broken. If I got say $200 for it broken then I am out $250 plus having to buy a new deck (I wouldn't go screen just a normal deck). So I am out $250 plus new deck costing say $300/400. So now $650 The problem is pioneers parts are alot. I don't wanna be way out. I hate having to spend money on this but at the same time I gotta eat up my mistake and move forward. So my

I post in my other thread about this. What Garrett's warrenty??? These eBay guys have very good feedback and are power sellers. I don't think they get feedback and reputations by having bad products. Like I said no problem with Garrett product just the price is alot more then all the the people who sell then. When I compare I look at this stuff Same harddrives Same software/firmware upgrades Ebay has bigger harddrive 80gig eBay has warrenty does he?? I just can see why his is almost double the eBay ones. Maybe he can't get the harddrives as cheap I don't know. I like

Yeah eBay for harddrive I will. With the feedback and "power seller" I trust then. They don't get those feedback and titles for nothing. Plus warranty on the drives plus they are the same drives Garret sells. I just don't see what the different is between the feedback Garret gets and the feedback that these power sellers get. They both are coming from buyers. How long is Garret's warranty?? This purchase was made outside of eBay on a different selling site all together. I blame myself for not checking the cd when I met with him. On the plus side of things it won't cost much. The motor seem

Private sale

Oh I bought it used

Ok I picked up my unit used for a pretty good price... Checked it out radio works and GPS worked so I was pretty satisfied.. Hooked it all up in my truck and tried out the DVD, well "nonreadable disc" pops up.. Well I already pretty much knew that meant.. There is something wrong with my player.. Tried to clean that didn't work... So now I gotta look around for another DVD player so I can do the swap or take it to pioneer and see if they will cover it under warrenty and if not then see how much they will charge me for the DVD player and work... I already know how to replace the DVD player it's