sitnlow4life

Same issue with the 4400

Have same bypass , but screen blacks out under speed 

I have the same question ...

I wired mine using my old appradio bypass .

I can watch video while sitting still and low speed .

Once I start moving like 5mph + it blacks the screen out and displays safety message .

The VSS isn't hooked up , so how is it determining speed ?

GPS antenna ?

Thanks 

Todd 

From what I'm reading on pioneers site the kit consists of an HDMI cable and a USB cable

Those are two things that are readily available now rather cheap

So in theory if you already have the iPhone 5 which comes with a lighting to USB cord all you need to purchase is the adapter from apple to do HDMI output .

My only question is ....

Will the unit need a firmware update to work correctly?

I Have the old TR-7

I called PAC today and they informed me that i could indeed use mode 17

They even supplied me with this document on how to program it

My question is....

The document he supplied showed an extra SPDT relay used in conjunction with the TR-7 similar to what was listed on page 1 of this thread.

I wired it up without the relay as stated above and I was unable to get it to work

Any ideas?

Thanks in advance

I'll reverse engineer it if they do.

 

I wonder though, While I know that the Z110BT can be upgraded to 2.000, is it running the same EXACT files as the Z120BT is running?

 

It could be possible to make package our own update by using testmode to dump the Z130BT file and flashing it ot the Z110BT/Z120BT

The Z130BT upgrade software is the same I am running it on my Z120BT

Trafic Tuner is a separate box and it doesnt work on the z-120bt

I updated my 120 to a 130 and the traffic button is there but it doesnt work because of the lack of the tuner box

Yes it does

you need to use AHA Radio

Can I store movies on the HDD on my Z3?

Thanks

anyone ?

any info would be helpful

thank you

so i picked up a Z1 the other day for a good price

when i went to power it up the fan comes on let the button lights then it clicks a few times and resets.

It does this over and over again

I determined the hard drive is most likely crashed

I removed the HDD and hooked it up to my PC I could not pull any info from it.

My question is

If I get either a Z1 or Z2 image can I just burn it to a new HDD and install it and be good to go?

Also I have searched the forums and I am not able to locate either .iso file.

Thanks in advance