bur1196

If you have a factory amp installed, chances are the installer didn't interface it with the AVIC correctly...

Double check your settings as listed below from the manual: Changing the voice output of the navigation guidance. You can set the speaker to output the navigation guidance and phone voice, etc. 1 Touch [Guide/Tel SP] in the System Settings menu. Each touch of [Guide/Tel SP] changes the settings as follows: • Left SP — Uses only the front left speaker • Right SP — Uses only the front right speaker • L+R SP — Uses both the front right and left speakers Hopefully yours is set in Right SP...

Very good point, I wish I would have thought of that when I brought mine...

Not a problem and glad that I could help

Double check your settings as listed below from the manual: Changing the voice output of the navigation guidance. You can set the speaker to output the navigation guidance and phone voice, etc. 1 Touch [Guide/Tel SP] in the System Settings menu. Each touch of [Guide/Tel SP] changes the settings as follows: • Left SP — Uses only the front left speaker • Right SP — Uses only the front right speaker • L+R SP — Uses both the front right and left speakers Hopefully yours is set in Right SP...

I will agree with you on this one, mine came off of the side of the mounting kit and I ended up replacing it (cheap plastics). It would come down half way before, now it comes all the way down...If you can, try to take it out of the mounting kit and hold it and press the button. See if it comes down that way...

That is what I figured, thanks for the quick response!

I am going to be installing the Z2 tomorrow night (have the wiring harness wired and ready to go) and was curious about the microphone. What are the pros and cons of having it installed? If it is for voice recognition or cell phone talking, I will not install unless I absolutely have too. Let me know what your thoughts are and thanks in advance! Greg