thehoof

Sorry I haven't updated this thread. I haven't had a chance to pull my radio out and look things over again as I've been pretty busy. My iPhone isn't jailbroken or anything yet. I used a harness from a local stereo shop but it does use the factory amp and has a remote wire for it. I did however rule out the mic being plugged in wrong because the nav can understand voice commands. Once I get a free night to pull it out I will try moving the wires to the rears and see how that works. I'll update when i know more thanks again for all your help guys.

that makes total sense I will pull it out and check tonight thanks a ton man!

I will def pull it out and check its kind of a pain but anything to make it work. Any ideas why I can't hear other people talk tho? 06 300C SRT8 btw

I will double check the mic plug but I fairly distinctly remember plugging it into the mic in port. I do not get voice guidance while driving, but I haven't tested this thoroughly(only set a destination once). I will check this stuff out and get back with you tonight thank you for the ideas.

iPhone is the only phone I have tried so far, I'll give a different phone a try tonight if possible.

I apologize if this has been asked before I did try quite a bit of searching with no results. iPhone pairs with the HU and autoconnects everytime I enter the car. I can dial numbers and make phone calls and it shows up on the phone with audio source Pioneer HDD Navi as the audio source. No one can hear me and no sound comes from the speakers. This is on an Avic-Z2 that is 2 wire bypassed and I installed it myself so assume I screwed something up Thanks in advance!