tater_kamik

i was wondering the differences between the different adapters, and the units they were designed for. i understand the CD-I200 will do video and audio from what i have seen on here, but is it only for the D series? or will it work correctly for the Z series as well? And what units and capabilites will the CD IB100II and CD IB100 adapters work with?

I had this problem as of yesterday. I downloaded the update from pioneer and followed directions. No need to reset the unit, just burn the disc and insert. It will then read the disc, check the drive and show progress on updates. But, what happened to mine was that after updates were complete it restarted showing navigation loading. Unfortunately it then said it was updating something and then failed, followed by an endless cycle of it restarting. I called pioneer support and the recommendation they gave was to turn the unit completely off for 30 minutes to "allow the hard drive to cool". I di

Yesterday i installed a new z2 into my 01 f150 and today the entire left side has no sound. I reseated the connections and redid the splices from the HU to the adapter. Still no go. Right side works great though! any ideas? Or is this a hint to go ahead and install an external amp? If so, anyone know where i can tap in for the front speakers? Thank you!

Thank you! I have to agree with you on the diamonds, they do sound very good. I was going to external amplifiers on them since they just sounded ok off of the clarion HU amp, but now im not even going to spend the time lol. Well that and i have limited space since the sub box is underneath the back seat, sub amp behind the rear seat in the little compartment that is there. That said, i really dont have much space though im sure i could put in another amp relatively easily. Maybe im just being lazy?

Due to an thief, im now a proud owner of a z2 in an 01 f150 lariat supercrew. I have to say, thank you everyone for the plethora of knowledge and information here. Basically, a little searching and i found all of the answers i needed. Installation wasnt too bad, just quite a bit of trimming and cleaning up afterwards. I didnt use any installation kit, rather i measured and bolted the unit directly to the black surrounding frame. I felt that this would give me some additional safety since its going to be a huge pain to remove and i highly doubt some punk thief could have enough strength to ri