Bones311

well just to clairify the problem, cause it seems people are really getting in an uproar about the message i got. it turns out that the clip in the harness wasn't holding the pin in place. so the pin fell out of the harness (on the radio side) i simply put it back in, glued it and its ok now.

ok well its working now. turns out that the amp wire from the car side of the harness (which isn't needed with the d3) was hooked up and killing the speedo. took all of 10 minutes to figure itout and fix it. now my bypass isn't working. like i said i found the diy here, and did it as follows: 1)take out mute wire (yellow and black) from harness and insert it in pin slot above. 2) ground mute wire (wire taped black ground) 3)ground parking brake wire (light green wire, tapped to ground seperately from mute wire) so now the problem im having is that whent he cars in motion the dv

hey guys, new here... i searched for this topic and found only one topic that discussed the cars actual speedo not working. everything else is about the speedo on the unit. so here goes. i have an 08 hyundai tiburon. i had a d3 installed today (done by a reputable local shop) upon leaving, i noticed that my speedo wasn't working, so i turn around and bring it back. the guy who installed it checked the fuses, his connections, etc etc, but to no avail. he ended up calling hyundai tech but their only suggestion (sensor is disconnected) wasn't the problem. i bought the unit on ebay used,