Jump to content
AVIC411.com

NavySAR

Members
  • Content Count

    6
  • Joined

  • Last visited

About NavySAR

  • Rank

  1. Well it took all day but with the help and info from here I got it all in and it seems to be working great. I didn't have to ask a lot of question, but with a few well worded searches I was well armed with info. Thanks to all who have thoughtfully shared their experiences. I hope one day I can return the favor.
  2. SWEEEEEEEEEEEEEEEEEEEEEEEEEEET!!!!!!!!!!!!!!!!!!!!!!
  3. is it a dual din kit. if so it may be right. should be two side pieces a face and rear support. And yes it does seem a bit cheap
  4. I have a 2007 escape with the audiophile 6 disc changer. I bought a aftermarket harness to connect my f90 to the factory wiring. When I hooked it to the power harness I just matched the colors. The VSS wire that came with the unit is pink. So I hooked it to the pink wire in the Harness. Now as I worked through some of the other forums I am not sure if that is right. Any help would be appreciated. The unit has not been installed it the truck yet.
  5. wires were not cut at all just pinched the insulation.
  6. I accidently pinched the cable on my GPS antenna cable. It exposed a little of the wiring, I sealed it with some silicone and taped it up. Is this a coaxial cable and if so do I need to buy a new antenna
×
×
  • Create New...