jgibo1

I think this thing doesn't like my Oklahoma\Texas accent

It worked for two days. Tried resetting but no luck.

Mine just stopped working today. Guess it is time to get it replaced.

I don't use texting much on my Iphone but I was hoping this would work with my F90bt. Anyone get this combo to work?

Radio now works. Ran a lead to the fuse block and now good to go. Need to get ipod to work next. Had it plugged in but wasn't doing anything.

I think I just realized I didn't break my antenna connection. I see there is a metra adapter. So maybe things are not as bad as I thought.

When you look at the Metra wiring harness it has two yellow cables coming out of the same hole in the plug. I just tested the radio by putting the red wire to power and radio came on. So it looks like that module isn't doing it's job. If you want to see a pic do a search for XSVI-5520-NAV. I guess I need to find another place to connect the red wire to and bypass the module.

I think it might be the harness. Turned key on for 30 seconds then off and then turned on but still nothing on radio. I just noticed that the plug has 2 constant yellow cables in plugged in. Guess I can look for another ignition option.

Right now the yellow wire is showing constant power. The Red wire from unit has a piece of paper that has ACC on it. The wire on the harness say 12 v ignition. This is from the wiring harness instructions. 'In the Ford/Lincoln/Mercury vehicles listed on back there are no 12 volt accessory wires in the factory radio harness making the installer run an accessory wire to the fuse box or underneath the steering column when installing an aftermarket radio. The XSVI-5520-NAV is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install

I found my volt meter and the plugged in the harness without radio. Touched end of plug with yellow and ground wires and they work. Tried red and nothing. I had the red wire from radio harness attached to the metra red wire on that harness. Took off the connected wire and still no juice.

Here is how my install is going badly. When I unplugged the antenna it looks like it came in half. Before I install everything in it I plugged in the harness, turned ignition on and nothing on HU. Tried hitting reset but nothing coming on. Will not having the antenna plugged in keep it from powering on? Have a 09 mustang with 4 speaker system. I haven't installed a stereo since the early ninetys but am technicle. I plugged in OEM radio and it still works minus the antenna.