dakranii

Thanks for the info Captain! I'll check out the Z110 and the possibility of a repair and see which makes more sense for me.

I suppose that means I'm looking at replacing the whole unit then?

I've had my Z1/3 for about 6 years. I replaced the harddrive a few years ago with a z3, so I'm running z3 software on z1 hardware. I moved it to a new car in July. I have the bypass applied. I've never had issues with the unit. Until about 3 weeks ago... The buttons and touchscreen started getting finicky. Now it has almost all stopped responding. On the remote, the volume buttons work (occasionally), and the Source button works all the time. On the unit, the hard buttons, only the volume works and the eject button (but trying to set screen tilt by holding the eject button do

I hooked up Apple's AV RCA cables to my Z2 and can get the video and sound to play, but it's only coming through my left speakers. I made sure that both red and white RCA's were solid and they are. Fade/Balance isn't an issue because it's centered, but when I FAde to the right all sound cuts out, obviously. Any idea what I'm missing here? Something in the menus? Thank you.

Thanks for the info. I noticed it was the wrong disc before I downloaded it. I did a search for the 700HD, not the 70MTP, and when it came up I assumed it was the correct one. I'll consider pulling it out, I don't have much on my drive, just wondering if I really want to rip all of my cds again. I would obviously much rather use the discs, so I was excited when I found them, but my excitement was a little hasty.

crap, i just noticed it's the 70MPT, not 700HD file. My search for 700HD pulled it up automatically, so I assumed that was it. oh well...

well, i just signed up. i'm going to try to download them and see if they work and if they include a keygen. i'll post my results, although it may be awhile.

I'm a cheap person and I had trouble convincing my wife that the Z1 was a worthwhile purchase to begin with. Now, we've moved, started new jobs, etc, so watching our money is a little more important, and another $250 on my Z1 isn't exactly winning over her heart. Although I would love those updated maps, my new town has been growing a lot and a good number of streets and POIs aren't on the maps. So I started looking around for a disc image and a keygen of the update. I found the disc image on fullreleases.com. I used to pirate a lot of software but I haven't done so in a long time. I

Thank you for the response. I had read up on here about pre and post 07/06 manufacturing dates, but I was originally unsure about mine as it had been made in April 06, but remanufactured by Pioneer. I didn't know if they would have done something to make me play by the 07/06 rules, so I wired it as such. I then read on your site that the bluetooth update should make a pre-07/06 unit work by the 07/06 rules, and thankfully it did. I am still getting parking brake warnings, but only when I first turn on the car and it boots up. I felt like the wiring went fine. I put the cell phone mute

I did the bluetooth cd update and the bypass worked! Yeah! Now I just need to fix the sound loudness with the RCA thing you mentioned and figure out how to get the face to move when the faceplate is on.

Also, it appears the 07/06 bypass did not work for me. Some options in the navigation grey-out when I'm moving. To ground the wires needed, some seemed to short to reach metal, so I twisted the five together (xm tuner, secret wire, parking brake wire, black wire in metra harness, black wire in z1 harness) and twisted a longer piggy-tail wire in as well, soldered them all together and just grounded the long piggy-tail wire. This should work correct? I get the parking brake incorrectly wired warning and can't get to some options while driving. Do I need to attempt to install the blu

If you're able to make pics, anything would help. I'm listening the radio on volume 3...sometimes 4 when I'm on the interstate...2 when I'm diving in town.

I just installed and I have two problems so far. 1) the stupid Metra fit kit for my car is too tight. The face can't tilt or open to display the disk slot. It's a Metra 99-8205 in a Pontiac Vibe. If the faceplate is off it opens just fine. When it's on it moves, gets stuck, then moves back to its normal position 2) I have a factory amp in my car. There were no RCA cables anywhere to be found either on the amp or the factory stereo. But when I turned on the car, the Z1 was really, really loud. I've turned it down to managable levels, but it's lowest setting is still too high f

another

I took some pictures, maybe the won't make sense.

"Reverse Light red/black + front of fuse box, 10 pin plug" I found the fuse box, it's under the instrument panel. It's a tight squeeze and there's a lot in there. I've seen several red/black wires, I can't tel what's a 10 pin plug and what isn't on all of them though. What does the + mean, and where exactly would "front of fuse box" be? Above the fuse box? Between the fuse box and the driver? Between the fuse box and the engine?

oh yeah, also. Do you think I'll have enough room in my dash to leave the XM tuner in there, or am I going to have to get creative and find a solid placement for it some where else?

There is a factory amp, so I'm hoping I won't be messing with RCAs. On another note, I bought the soldering kit and just soldered everything that I think needs soldering. I took mental note of all that needs grounded: - The black wire on the Metra harness - The black wire on the Z1 harness - The black wire from the XM unit - The green parking brake wire from the Z1 harness - The secret wire from Connector 2 (I took ducati's suggestion and pulled the cell phone mute out of connector 1 and successfully put into the empty slot on connector 2 in the picture) Tomorrow mo

Wow, quick response. Good to know on all those answers. But I just realized, I have the "moons and tunes" package with my Vibe, so I have an amp connected. I'm not sure what factory speakers are being powered by it. But it appears I'm going to need to get some RCA cables to run from Connector 1 to the amp? I haven't peaked at the back of the factory radio yet, so I'm not sure what's back there. So the blue/white wire on the Metra harness, called "amp turn-on" will connect to the blue/white wire on Z1's Connector 1, called "system remote control." Will I need those RCA cables as we

I'm piecing it all together slowly. I've come up with three new questions. 1) What do I hook the yellow power wire from the XM receiver to? Can I add it to the two yellow wires from the Metra harness and the Z1 harness? Have all three hooked together? 2) Wire #2 of the 07/06 bypass is from connector #2. I had set connector #2 aside as a part I won't need because I won't have an external monitor, nor a wired remote, nor a rearview camera. Although I can't figure out what the "Guide On" yellow with black stripe wire is for. Even if I don't need anything else on that connector,

Good deal, I'll pick up a soldering starter kit at RadioShack for $7.99. What's the "secret wire" you mention? On a side note, I haven't been able to locate on the web where the VSS and Reverse wire would be on an 03 Vibe. Does anyone know?

I just bought a z1 and it arrived today with all my accessories. It's all a confusing jumble of wires and instructions on my table right now. I've installed two single din head units in vehicles in the past, but nothing near this involved. I'm a little disoriented with it all, but I suppose it will start to make sense once I start. I had a few questions before I begin though. 1) I was planning to use wire nuts to connect the wires instead of soldering. Aside from taking up a little more space, is there anything wrong with this method? 2) I bought a factory reconditioned z1, s

http://www.avic411.com/forum/viewtopic. ... ight=fraud Good to know, thank you.

I've done searches for http://www.theelectronicdealers.com, electronicdealers.com, theelectronicdealers.com, electronicdealers, the electronic dealers and none are showing me specifically that thread. Most are coming back with results of 300 or more. Do you have the specific link? I'll keep searching for it.

Okay...so more than likely, any z1 I pick up at a retail outlet will not need the bypass, but rather this other method (assuming retail outlets will be stocking post 07/06 units). I'm assuming this is detailed in another thread on the site. I'll do a search for instructions. Thank you.