Jump to content
AVIC411.com

scott65

Members
  • Content Count

    2
  • Joined

  • Last visited

About scott65

  • Rank

  1. Sorry if this has been asked before, I've searched and couldn't find anything. I put my D3 in last night and I get random pulsing noises out of the subs. I tried hooking them to the sub output and the rear output channel, both create the same noise. It comes and goes, seems like lots of bass set it off and I have to turn it all the way down to get it to stop. Since both outputs cause it, it would seem that its being caused by something else, but I've had the same amp and speakers in the truck for a long time with the factory radio and an aftermarket one and neither caused this. It only st
  2. Hey guys, I bought a used D3 and had to order a power harness for it. I goofed and bought a cheapo on ebay and I'm pretty sure a couple of wires are missing. I was going to do the bypass and I don't have the wires that are mentioned in the write-up. Could someone tell me which pins are the reverse camera input and parking brake. Also, is this the harness that should have the speed sensor wire? If so, where does it go and I'll make one for that hole too. Thanks in advance
×
×
  • Create New...