mustangreggie

Anybody? Ok, I am still without subs but I have checked a few things and narrowed some things down. I am still getting power to my amps, so the fuse is still good. I have checked my grounds which are also still good. When I disconnected the pin connector coming into my amp from the HU/harness, I checked each wire for any type of voltage that is associated with the amp turn-on (blue/white wire from the Pioneer harness). Should that amp turn-on voltage be readable from tnat pin connector? I got 0V for each wire, so I am not really sure if I should be reading anything or not. What would be

I have been lurking here for a few weeks, absorbing tons of information from you guys, but this is my first post. I purchased an F90BT for my 2005 Mustang with the Shaker 500 system a few weeks ago and just recently installed it the other day. This was my first modern stereo installation, being that all my previous installs were on classic Mustangs (totally different beasts technologically). I decided to purchase the PAC C2R FRD1 wiring harness to make things as easy as possible. I also performed the hardware bypass on the unit beforehand. My system is completely stock save for the HU.