Graveyard utp

Ok i just went into the navi settings and it shows that the parking brake is off. I tryed to wiggle the wires around and the unit stil reads that it is off. I think there is a problem with the unit.

Thanks

The shop used a T-tap to the hook up the bypass to the ground i am going to see if that is the problem next.

Thanks for all of your help.

Thanks for your help. I have checked all of the wires and they are connected. Do you think this could be a software issue with the unit? I find it strange that we cant even search for a new destination for the gps. The unit is missing some of the wires and the shop that put the unit in replaced the green parking break wire with a blue and white wire. They moved the black and yellow wire down in the white plug and had the ground black/yellow and new parking break wire tied together. Do you know of anything i can look for to try to get this fixed?

I was hopeing someone could help me with a problem I am having with a Avic-D3. The unit was installed in an 06 Silverado and worked fine the gps worked and the video bypass worked so he could watch dvds. I hooked a amp and subs to his car only disconnecting the battery for the amp kit. After i hooking the battery back up the D3 no longer let us look for a new destination or watch dvds when we were parked. Is it possable that by unhooking the battery that the bypass no longer works? Is there anything else i can try?

Does anyone have a picture of the wire harness for a D3? The one i have was used and is missing wires i am trying to figure out what pin number the parking break wire should be in.