alfagt1963

My Alfa screen

2 Splash screens for Alfa Romeo cars with or without BOSE system.

Hi I have v3 upgrade files if you still need them. Regards Mark

Hi When using my F900BT with a route set, if the system recalculates the route it changes the map view to 'N', I have to press the map view button to return it to '2D' view. During normal use if I press the map button when the map appears it is in '2D' view and when I first set a route. Is there a setting I can change to allow the map to always default to '2D' view. Thanks Mark

Hi I had a similar problem with my F900BT, when it was connected using the RCA connectors I had to set the volume to about 45/50 to get decent sound level but the sat nav voice and the phone volume was too low. I rewired using the speaker outputs and all volumes worked perfectly Hope this helps Mark

Have you looked at the GPS settings to check you are receiving signals from the satellites? From the main menu go to settings, nav settings and then GPS, you should see signal strength and the number of satellites being received, if not then you could have problem with the antenna. make sure it has no metal sheiding it from the satellites. Hope this helps Mark.

Problem sorted!! I wired my system using the RCA outputs connected to my Bose amplifier, I had to set the volume to about 45/50 to get a decent sound level. I am now using the standard speaker outputs connected to my Bose amplifier and the volume level is about 10/15 and the satnav voices and phone volumes are working perfectly. Apparently the Pioneer RCA outputs are about 2v and the Bose amplifier requires 4v to attain a decent volume level. Hope this helps others Regards Mark

Hi all, Just installed my Avic F900bt into my Alfa Romeo GT with Bose sound system. I have set the master and voice volume to maximum but they are still not as loud as the system volume, if I set the volume to make the GPS voice volume loud enough then the radio volume is too loud. Is there any way to sync the volumes or to adjust the GPS volume. Thanks

Hi Have a look at this thread, viewtopic.php?f=32&t=31236 I used it and now have a F900bt with V3.0202 firmware, V02.0006 maps and Windows CE 6.2.2.8. Regards Mark