keninsb

Hi. I have searched the forums, and cannot find an answer for this one. I am trying to upload a new splash screen to my Z110BT. I have read the manual and have kept the size lower that the max and all images have been JPG. I even tried using the image resizer located on this site. When I check the SD card from the HU, there are several photos that are selectable, but the logos that I have been working on are not selectable. I even downloaded a pic someone had posted in this forumn and again no luck. Any suggestions? Thanks for any help, Ken

You know I had done a search, but couldn't find much. I searched again and founf the answer here viewtopic.php?f=58&t=33025&p=222105&hilit=hd+radio+am+fm#p222105 Bummer. I was hoping you could use both. Good thing I bought that "Y" antenna adapter! DOH!

I just installed a Z110BT with XM and HD Radio. I noticed that the AM and FM selection are greyed out (not selectable) from the audio menu even though I have an antenna splitter installed so that the antenna feeds the HU and the HD tuner. Are you supposed to be able to access both, or once you have HD do you give up the standard AM/FM channels? Any help is greatly appreciated. Thanks, Ken

OK, here is what I tried: I ohmed out the MUTE pin to make sure it was getting good ground and it was. Then I applied a little bit of dielectric grease to that pin on the head unit and VIOLA! The problem is gone. It must have been a bad connection because the MUTE pin WAS insterted allthe way. At any rate, it apprears that the problem is solved. WHEW! Thanks for the help, Ken

I am having a similar problem. I did the same bypass (moved the MUTE wire one pin over and ran it and the Parking Brake sensor to ground). Every time the unit is turned on, an error message is displayed indicating that the system has detected that the parking brake wire is not connected correctly. Any help is GREATLY appreciated. Ken