sickrick2010

PAC SWIPS version 1.6.8 is compatible... Thanks, Rick

Hacked out the rear camera pin to use for bypass using the "cut connector with razor blade" method found on youtube. Install went smoothly, except for the PAC steering wheel remote interface I had on the Z1, not talking to the Z120. Thanks to all for your help... Rick

1 - thanks, having my installer put it in anyway.. 2 - Thanks 3 - Thanks again, installer (at a retail Pioneer dealer) was telling me they're getting alot of them back with the bypass - they aren't recommending it, but will do it at the customers request with that caveat. 4 - Thanks (again) 5 - Cool (thanks, LOL) 6 - Thanks (getting boring, I know)... As far as the pic of my harness - the difference is the number of OTHER WIRES in the Z110 harness that are different colors/positions (like the blue/white in the far left top position). Guess I'll find out tomorrow whe

My harness looks significantly different than the one in the bypass thread. Is it still top right wire (labled mute), one position to the left for the Z120? Mine Bypass thread photo Thanks, Rick

Finally retiring my aging Z1 - have been doing a bunch of "catching up reading" here, but have a couple of questions regarding my install tomorrow. 1 - Are the Z1/Z3 and the Z120 cable harnesses the same? Or am I going to have to hack out all my wiring and re-wire everything? 2 - Is the Z120 "move the mute wire & ground with brake wire bypass" working on current rev's of firmware (ie: newly purchased models)? 3 - Does this work LONG TERM - as my installer is telling me they're having customers with new units that are bypassed coming back after 2 or 3 months with the units lo