Jump to content
AVIC411.com

Dosmac

Members
  • Content Count

    5
  • Joined

  • Last visited

About Dosmac

  • Rank

  1. Went outside again and got frostbite nearly Lots and lots of wires! Tested the wires for what voltages were present at what states of the ignition. The yellow leads read 14v always (Checks out to specs, I do believe) however, the red leads read at 1.20V and drops slightly at a constant rate. I went and tried your suggestion of tapping into my fuse box and ran 18ga speaker wire to the cap of joint wires just before my radio leading to it. The deck powered on as soon as I turned the car on and turned off perfectly when the door was open after key was turned off. Would this
  2. Looks like that might be my only solution. Thought it was a short, but couldn't find it my self :/ Checked all the fuses I could find in line to the deck, the main fuse near my battery for my AMP, everything else tested/was okay that I could find.
  3. I used the F90 harness for the power, and the X920BT's A/V and removed the old F90's A/V wire as the plugs were changed. The plug for the power was the same. Why would the deck power up for long enough to hit "OK" twice though? and only ONCE. Weird.
  4. UPDATED: Main issue figured out, now just a question of THE RED WIRE! ---- I posted this in the X920BT forums but nothing yet! Hope it's not against the rules to post here as well, but it pertains to both of my stereos/problems. Sorry mods if it's not allowed. (New to these forums and just really looking for help with a problem plaguing me for a month now :s) In my '05 Pontiac G6 I had a F90BT previously and replaced it for a X920BT because I thought my F90 had died. Unfortunately when I installed the X920BT, after hitting "OK" twice to confirm Language and Voice language(I think?) th
  5. In my '05 Pontiac G6 I had a F90BT previously and replaced it for a X920BT because I thought my F90 had died. Unfortunately when I installed the X920BT, after hitting "OK" twice to confirm Language and Voice language(I think?) the deck instantly turned off after hitting OK on the second prompt. Hitting "OK" caused sound to be played through my speakers throughout the car perfectly fine. The reason I replaced my old deck is that my F90 had one day decided to not turn on. Turned the car off at a bank, came back outside and the deck was totally dead. A few hours later after re-starting my car
×
×
  • Create New...