alfarm2000

Does any body know were I can find the illumination wire for that particular ford. The car harness does not have the orange/white wire. Thanks

Finally got mine installed. Still having some issues with the PACSWI, and illumination. Will work on them today. Here is a oic after the install.

So it programs for your ford, you get 9 flashes after turning the car to acc? Yes Then you hit the program button once and the led should stay on is that happening? If not it has to do with the resistor you used. Make sure it is a 100 Ohm resistor, because that can cause problems. It stays on. replaced resistor from radio shack. If the led stays on you then hit your volume up button and the led goes off and come back on ?? It goes off and does not come back on. after a minute it flashes 3 times and them 9. Any sugestions?

Fix the antenna connection problem, thanks for the advice, Sabre. But the pac still gives me problems, Everything is connected the way you told me I get the 9 set of lights, but when it is time to program I only get one light and it does not come back on after the first programing of the volume button. Any advice. Thanks

Good evening to all in the forum. Just finished installing my AVIC D3 on my 2007 ford EDGE. It looks and sound awesome, but I encounter a couple of problems. First. my stering wheel remote adapter is not working. I follow the instructions to the letter even adding the 100ohm resistor to the white cable connected to pin 18. Any suggestions. Secon I did not know ford had a different antenna connector.Where can I get one. It looks almos like the satellite connector. Your help with this issues are greatly appreciated.

I just got my AVIC D3 last night and plan to install it this week end. Does any one knows were the vss connection is on a 2007 ford edge. Your help is greatly appreciated.

I bought mine from them on monday last week. I had to call them to get the tracking nnumber. Got it yesterday.