Jump to content
AVIC411.com

smoked transistors

Members
  • Content Count

    6
  • Joined

  • Last visited

About smoked transistors

  • Rank

  1. Car Play media articles from May 16TH in San Francisco for Apple Car Play Event in Pioneer Vehicles Just Google Carplay aftermarket pioneer
  2. AVIC-5000NEX (No built in HDMI port) glitches NOW most all the time using iPhone 5 - IOS 7.1.1, Apple to lightning VGA Adapter, Pioneer CD-IV202AV iPhone5 adapter RGB - CD-IU52 USB charging cable. 5000NEX smartphone settings needs to be set for Device iPhone - Connection VGA / RGB ? It worked periodically and then does not work for viewing Netflix, Youtube. I think this started happening after i updating to Apple IOS 7.0, & above. Not 100 % sure, but I used to be able to surf Youtube as long as I was using the Safari browser not Bing I know for sure that AppRadio Mode used on
  3. Are you using a steering wheel interface module? If so try to unplug it at the navi's wire remote input plug (3.5 MM)and see if "ATT" disappears for good. If i remember correctly a Pioneer made a marine remote controller that had a "ATT Button" on it. Possible the steering wheel interface module maybe causing the intermittent ATT issue to appear on your display thur wire remote input of the navi.
  4. You only hear navi voice guidance and bluetooth phone calls output from the front RCA outputs or front speaker level outputs of any Pioneer navi unit. To test,play audio from the AM/FM tuner and fade your music all the way to the front, if you lose your front audio, then your not wired up correctly.Or your using just the rear outputs.(Dodge can- bus adapters) If your using amps check to make sure all the amp settings are correct(2ch,4ch,5ch.6ch)
  5. The AVIC-Z130BT has the built in HD tuner simular to the GEX-P20HD and due to these tuners limitations this is why the presets get displayed as "P1,P2,P3. I'm not sure it can be fixed.
  6. Any one using Voice Recognition for dialing contacts will notice that it will freeze up on the AVIC-Z130BT, if the "Map" is not displaying on the navi unit. Once the map veiw is displayed it works fine. Pioneer is aware of this issue and working on a fix from what i have been told.
×
×
  • Create New...