mmoffitt

I ran the blue/white wire to the hot side of the reverse lights of the car. Then I ran a hot wire from the red wire off the back of the radio (hot) to the red wire on the camera. Then I grounded the black wire from the camera to the ground wire on the backup lights of the car. Once I did all of that, it worked perfect. Before I did that, I was getting the same as you...

In case anyone else experience the same issues, I've got a least a few answers. 1. Backup camera issue: I didn't understand that I needed to run 2 wires from the radio to the back of the car to the camera. The violet/white wire out of the radio is for sensing when the car goes in reverse. That wire runs to the back of the car and connects to the hot wire of the backup lights so that it's hot when the lights come on. Then you have to run a 12+ switched wire (red from the radio) to the back and connect to the + of the camera. Then I still had the problem with it switching back to the c

I just installed the P3200BT in my 06 mustang base model. I've got three issues: 1. Anytime the Backup camera is "on" on the deck, even if I'm listening to radio or watching a DVD, it keeps trying to switch back to the backup cam about 15 seconds after I've selected a different source. (I've currently got the camera connected to the backup lights for power and grounded but I don't have the wire on the headunit for backup camera sensing connected) 2. The "tag" button is greyed out and I can't figure out how to enable it. I've tried with Ipod connected, not connected. SD card in, SD car