seafarer

Now, after a few days, I succeeded.

The only difference to my previous attempts was the way I unzipped the files.

Instead of unzipping into a PC file and then copying to the sd card this time I directly unzipped to the sd card.

Many thanks to Godzilla and RonS!

sorry, 

but, I finally made it to get my old 2015 status back.

I first have to relax a bit before I try further.

Many thanks to RONS and Michael_81.

 

Thanks RonS!

 

I've done all this:

Unpacked 2017 Update with "Single Quotes"

then as Psydon wrote:

 

edited CARDINFO.CIF.

 

OE9R75LQ2MJ2X72EUR

 

and replace it with

 

X07EURX27EURX30EUR

 

Then save CARDINFO.CIF and replace the update to SD card.

(I already provide edited CARDINFO.CIF, so you can simply overwrite it)

 

Then I used TestMode to get RenewalIFLib.dll from HU to edit it.

I copied from the following location \ USER \ PRG0 \ APL

Then it worked on PC with HxD.exe and made the following changes:

 

Replaces all (hex) 0350A0E3 with 0050A0E3.

 

Saved the file, copied to SD card, then copied to HU copied to:

\ USER \ PRG0 \ APL

and

\ USER \ PRG1 \ APL

 

Booted SD Card with 2017 update, then entered for update password: PASSWORDPASSWORD

 

At 98% received the message "Wrong SD", I repeated 2017 update-the same result !!!

Then I tried to write the files to another SD, the result is the same!

Next, I chose to SD 2017 Update\ UPDATE \ USER \ PRG \ APL  to replace RenewalIFLib.dll with the modified RenewalIFLib.dll.

Then everything works!!!

 

 

seafarer

Edit RenewalIFLib.dll in HxD.exe

Replaces all (hex) 0350A0E3 with 0050A0E3

Try again, as RonS writes, again unpack 2017 Update...

 

I am sorry for my English

 

Hallo Michael_81,

Bisher haben alle Versuche an verschiedenen Stellen zum Abbruch wegen falscher SD-Card geführt.

Selbst meine alte SD-Card mit dem 2015 Update bleibt mittendrin hängen.

Ich versuche jetzt, deinen Ablauf Schritt für Schritt nach zu machen.

Im Moment weiß ich nicht, was die Abkürzung HU bedeutet.

Gruß,

seafarer

today i tried to update my F920BT.

Everything went fine until it came to 93% and 2 minutes left.

A message came up saying: wrong SD card. please insert correct SD card.

I have also updated my AviÑ F20BT! I had problems on 98%, "set the correct SD"

I solved the problem, copied the modified file RenewallFlib.dll in the update 2017!

 

THX to Godzilla and RonS!

Michael_81

Where did you get the modified file RenewallFlib.dll?

Did you make the changes mentioned in the 2015 thread?

This is CardInfo of Update 2015 F20BT

https://mega.nz/#!hbQRzawR!kGs0DWU96Otvl-Wtv6j2MRNqUj25G_Y6Su01UqXHylc

This file matches the Cardinfo I used with the 2015 update.

I will put it into the 2017 update and test it.

Thanks! 

How about F920BT?

The headline of the downloads also mentions AVIC-F920BT.

Did anybody try this unit?

THX!

Update worked fine on F920BT with special cardinfo from 5,0 to 6,0 with 2015 maps.

The only minor problem I have since 5.0: Display calibration does not work.

I can can touch all the little crosses but, at the end I cannot finish the procedure.

Problem solved!

I forgot to put the light green wire to ground to simulate the parking brake beeing set.

Thanks!

Hello,

I did the update on my F920BT and encounter the following Problem:

The update worked as described, but, after that the settings menue only shows two active (highlighted) items: AV-settings and AV-sound. All other settings are dark and cannot be selected.

So I cannot do the Bluetooth update not to mention any other settings. Even the delete function of my stored navi destinations does not run.

But, I can hear music from all sources and I can navigate.

If there are no other good advices from somebody I'm afraid I have to follow diverke's way and look for a service center to reset the unit to some defined state.

Best wishes for the upcoming Holidays.