replay_audio

Every button on the front has become unresponsive. I replaced cars a few months ago but unit has been working fine since. The touch screen is working perfectly. Any ideas? Thanks.

Nothing working, I tried this http://avic411.com/index.php?/topic/31534-condis-hackmode-v14-diskrw-gpsgate-textfiller-regeditor-with-reg-files-associated-updated-13062011/ It will reboot then back to the white screen.

Been searching the forum for a bit with no luck. Would this be the same problem as a Solid black screen? Any ideas? Got this unit as a trade in and when tested The unit powers up but only shows a solid white screen. Thinking I will update the firmware. But maybe its a wiring issue? Thanks guys.

getting a black screen after install. Rebooted after install got the splash screen then unit went blank. Any ideas? Been searching around for hours

I was asking if I would still need to go through service mode to get to test mode. Ive been waiting for days for the PB download with no luck. I have the 2.6 upgrade ready to go. Can I follow these steps and replace the 3.1 for 2.6? WIll it work the same?

Just waiting to DL the file the bay. Now if I can get into test mode with SD I can skip the first steps to getting into test mode right?

I have the F700BT. Thanks for the quick reply. I will try with those instructions. I'll search around for 2011 maps. Does it matter that I didnt back up (think I already deleted) the igo folder?

Trying to upgrade firmware to 2.06. everything updates ok until It hits the 78% mark. Then red screen saying not enough storage space. I can get the unit into test mode but I dont know what or how to delete items to free up more space. Also after doing this I lost access to maps and audio. How can I get this back to factory? Thanks.

Need to reset to factory. Navi and system settings are grey'd out. Im guessing its the parking brake. Any way to reset w/o hooking up P brake? I know on my z110 you can just hold mode and track on the splash screen. If theres no other way than p brake, What wire and how could I hook it up to a power source. Im using a car jump supply to power up. Thanks for your help.