kaczman

blue when I leave the polarity on ground or battery, grey when i leave it to "off"

bump. very frustrating.

I have an AppRadio2. When I first hooked it up, I wired the camera power to the accessory red wire off my vehicle harness, and used a PAC RP5-GM31 harness. So I wired the purple with white stripe wire off the radio into the purple with white stripe wire off the PAC harness. Then when I drove, the camera would randomly come on at all times. So I took the radio out, installed the latest radio firmware update, and then disconnected the purple and white line off the harness, and ran the purple and white line directly to the backup lamp fuse on the circuit breaker. Put the radio back in, no

Hi all, can someone post their Functional tasker settings to activate when you plug in the MHL/HDMI cable? Im not even sure of the correct process, for me it appears to be to go into bluetooth settings then click the pair connection to actually get arlibertor to respond.

hi all, I just installed an AppRadio2 in my 2007 Avalanche LTZ using the PAC GM5 harness. While I have figured out ARLiberator and it works great, there are a few questions that I cannot figure out for the life of me, and I was wondering if one of the experienced members on here could shed some light on to what I screwed up. First off, I am using it with my android phone, so I never ran the iphone cable, and its buried behind 2+ hours of install and removal to get behind the radio. I diddnt really care about that cable, but then i remembered the latest firmware update from pioneer, which m

I take it that is FX3.1 Firmware ?

bump?

Hello All, I bought a F700BT a week or two ago, and I've been reading this forum for a week. Its pretty confusing trying to figure out what to do first - or what to do at all - with all the stickies. I see there are two just for the 3.0 firmware update. I started to take the plunge today, but the Ohio map is missing from the sticky at the top... and I live in ohio. I also see at the end of each 3.0 thread theres 2 or 3 pages of people having problems with their device following the install instructions provided. Does anyone know the latest location of the maps to use, the firmware vers

Uh... the Ohio map location doesnt exist, and I live in Ohio. any ideas?