kryngle

This is what imgburn is showin for my urner. Still havin trouble. HL-DT-ST DVDRAM GSA-4160B A306 (ATAPI) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Supported Write Speeds: 0.5x, 1x, 2x, 3.1x, 4.2x, 5.2x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Disc Control Blocks Information: HL-DT-ST GSA-4160B Physical Format Information (Last Recorded): Disc ID: RITEK-S04-66 Book Type: DVD-ROM Part Version: 1 Disc Size: 1

I jus updated the drive from the LG website. I now have the A306 version installed. I erased MagicISO off my comp and gonna try this from scratch and see wats up. That's an old burner. First see if there are firmware upgrades for that burner by clicking on the link below: http://cdrinfo.com/Sections/Firmware/Si ... riveId=984 Second, there is a "Book Type" setting in imgburn that you should verify. It's in the lower right hand corner of the program. Confirm you have it set for DVD-ROM under the dual layer setting. Note that if you update the firmware of your LG, you may n

That's an old burner. First see if there are firmware upgrades for that burner by clicking on the link below: http://cdrinfo.com/Sections/Firmware/Si ... riveId=984 Second, there is a "Book Type" setting in imgburn that you should verify. It's in the lower right hand corner of the program. Confirm you have it set for DVD-ROM under the dual layer setting. Note that if you update the firmware of your LG, you may need to reset the book type setting. Hey Itchy I been to that site and it tranfers me to some asian site and I can't ready what is writin. Is there an english version?

Startin to think it might be my burner. I have a GSA-4160B and its dual layer but I did exactly what the direction stated. I just got an error statin " Invalid field in parameter list" and what not

Yup did EXACTLY that from day 1 but I get this error poppin up sayin "Fail to set L0 Data Capacity! Reason: Write Error" Then it ask me to "Cancel, Try Again or Continue" Thats where it messes up for me

Much appreciated Ryan very much. But at the end of the day I need to learn how to do this as well for when the East coast disk comes available. Thats why Im tryin everything possible to get familour on how to do this

I know all that. ALl I wanna do is burn this west coast disk and have it ready for when I travel to L.A. this winter. But I know I will have the 2008 east disk by then. All I wanna do is get this to an ISO file and burn it successfully and have it ready for when I need it. But for some reason Im doin somethin wrong and I jus dunno what it is y'all

I know but I will be makin a trip to L.A. this winter so I would like to have this disk as well. I havent even got to the stage of even testin this in the D3 since Im still tryin to get a successful burn... Shit I sound so damn annoyin. SOrry everybody its jus fustrating not gettin this to work out for me

Thats the problem. After I decompress the file I select "Burn CD/DVD with ISO" and it jus wont work. And thats me usin MagicISO. When usin Imgburn Im jus lost. I don't even know where to begin. I had to go out and buy a pack of 5o Dual Layer Memorex DVD+R for $34It jus reach the point I don't know wat to do

I dunno what to say but Im havin the MOST problem. MagicISO wont work for me, I even decompressed it, same shit. Imgburn wont work for me. I used 5 dual layer dvd's already and bullshit. I dunno what the hell Im doin wrong here but Im havin not luck what so ever. Dunno wat Im doin wrong

And still no help... womp womp

I downloaded the program and what not like u said but its when Im in imgburn is where I get lost. I have never used imgburn before to actually know what to be doin... Sorry to sound like a nOObie but with imgburn I am one Dude, you must have skipped my post or didn't understand it. Download the program I posted and follow the directions. It will convert the .uif to an .iso file.

BUT how do u use imgburn??? This is where im havin mad problems. I decompressed the file on MagicISO and now Im tryin to burn it on Imgburn. What am I doin wrong here people?

Okay people need ur help big time. I am usin MagicISO and it will not let me burn it with the Trial version so I had to decompress UIF the file and it reads 7.92GB. After thats all said and done how do I convert this file to an ISO and how do I burn it in Image burn???

And lets say I use Roxio 9 to burn this, would I select Data and then Data Disc???

What do you guys think of this DVD Dual Layer brand to burn the disk? http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3285647&Sku=M200-1242

Yes I must know what disks are recommended for burnin. Dual layer +R or -R???

Even tho I need the east coast, Thanks Allsound. Nuff respect my friend

East coast, East coast, East coast, East coast, East coast,East coast

I must ask tho, what happend to the east coast disk for us east coasters??? Why only the west coast?

I would like to know even if I download this WEST coast disk will it still upgrade the system??? Then again whats the point if Im in the east and this is a west coast disk???

Well doesn't that suck the bag??? Im from the east coast and now Im outta luck. DAMMIT!!!

Soooo I take it u gonna be the hero and get them discs up on Torrent already correct??? Save us, save us all and get them uploaded and THANK YOU VERY MUCH

Here are the SPECS from the Canadian site. http://www.pioneerelectronics.ca/POCEN/Products/Navigation/In-Dash+Navigation/AVIC-N5?tab=B

That is sooo true... When September comes through it will then say October lol... I think that ski mask is comin down and Best Buy will be gettin JACKED for an N5 jus for the map lol