kryngle

This is what imgburn is showin for my urner. Still havin trouble.

HL-DT-ST DVDRAM GSA-4160B A306 (ATAPI)

Current Profile: DVD+R DL

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 4,173,824

Free Space: 8,547,991,552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Supported Write Speeds: 0.5x, 1x, 2x, 3.1x, 4.2x, 5.2x

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 2,086,912

Changeable: Yes

Disc Control Blocks Information:

HL-DT-ST GSA-4160B

Physical Format Information (Last Recorded):

Disc ID: RITEK-S04-66

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

I jus updated the drive from the LG website. I now have the A306 version installed. I erased MagicISO off my comp and gonna try this from scratch and see wats up.

Startin to think it might be my burner. I have a GSA-4160B and its dual layer but I did exactly what the direction stated. I just got an error statin " Invalid field in parameter list" and what not

 

That's an old burner. First see if there are firmware upgrades for that burner by clicking on the link below:

http://cdrinfo.com/Sections/Firmware/Si ... riveId=984

 

Second, there is a "Book Type" setting in imgburn that you should verify. It's in the lower right hand corner of the program. Confirm you have it set for DVD-ROM under the dual layer setting.

 

Note that if you update the firmware of your LG, you may need to reset the book type setting.

 

Hey Itchy I been to that site and it tranfers me to some asian site and I can't ready what is writin. Is there an english version?

 

 

just go to cdrinfo.com, select download, then firmware, then your drive type: IDE, LG, model #. Download the latest firmware.

Startin to think it might be my burner. I have a GSA-4160B and its dual layer but I did exactly what the direction stated. I just got an error statin " Invalid field in parameter list" and what not

 

That's an old burner. First see if there are firmware upgrades for that burner by clicking on the link below:

http://cdrinfo.com/Sections/Firmware/Si ... riveId=984

 

Second, there is a "Book Type" setting in imgburn that you should verify. It's in the lower right hand corner of the program. Confirm you have it set for DVD-ROM under the dual layer setting.

 

Note that if you update the firmware of your LG, you may need to reset the book type setting.

Hey Itchy I been to that site and it tranfers me to some asian site and I can't ready what is writin. Is there an english version?

Startin to think it might be my burner. I have a GSA-4160B and its dual layer but I did exactly what the direction stated. I just got an error statin " Invalid field in parameter list" and what not

Yup did EXACTLY that from day 1 but I get this error poppin up sayin "Fail to set L0 Data Capacity! Reason: Write Error" Then it ask me to "Cancel, Try Again or Continue" Thats where it messes up for me

Okay kryngle, I made a step-by-step tutorial for you:

 

Open up the ImgBurn program.

 

 

 

 

if u want the disk that bad i live in oakville i could meet u in mississauaga if u want give u a disk

Much appreciated Ryan very much. But at the end of the day I need to learn how to do this as well for when the East coast disk comes available. Thats why Im tryin everything possible to get familour on how to do this

I know all that. ALl I wanna do is burn this west coast disk and have it ready for when I travel to L.A. this winter. But I know I will have the 2008 east disk by then. All I wanna do is get this to an ISO file and burn it successfully and have it ready for when I need it. But for some reason Im doin somethin wrong and I jus dunno what it is y'all

kryngle the west disk wont work for u if u live in toronto u need the east disk..if u have put the disk in and it wont read it roll back to you old dvd's

I know but I will be makin a trip to L.A. this winter so I would like to have this disk as well. I havent even got to the stage of even testin this in the D3 since Im still tryin to get a successful burn... Shit I sound so damn annoyin. SOrry everybody its jus fustrating not gettin this to work out for me

IF ANYONE HAS SUCCESSFULLY USED THIS FILE TO UPDATE THE D1, PLEASE LET ME KNOW.

 

 

Kryngle - If you have already decompressed the original UIF file to ISO, then all you have to do is choose to write an ISO to a disk, select ISO, insert DL disk, and burn.

Thats the problem. After I decompress the file I select "Burn CD/DVD with ISO" and it jus wont work. And thats me usin MagicISO. When usin Imgburn Im jus lost. I don't even know where to begin. I had to go out and buy a pack of 5o Dual Layer Memorex DVD+R for $34It jus reach the point I don't know wat to do

I dunno what to say but Im havin the MOST problem. MagicISO wont work for me, I even decompressed it, same shit. Imgburn wont work for me. I used 5 dual layer dvd's already and bullshit. I dunno what the hell Im doin wrong here but Im havin not luck what so ever. Dunno wat Im doin wrong

And still no help... womp womp

I downloaded the program and what not like u said but its when Im in imgburn is where I get lost. I have never used imgburn before to actually know what to be doin... Sorry to sound like a nOObie but with imgburn I am one

Okay people need ur help big time. I am usin MagicISO and it will not let me burn it with the Trial version so I had to decompress UIF the file and it reads 7.92GB. After thats all said and done how do I convert this file to an ISO and how do I burn it in Image burn???

 

Dude, you must have skipped my post or didn't understand it. Download the program I posted and follow the directions. It will convert the .uif to an .iso file.

well i got it downloaded and burned to a DL disk. first one i used magic ISO and it didnt work. then tried Imgburn and it worked first time! indeed it's a upgrade. and havent knoticed any map updates yet but sofar i'm happy! i need to send ya a beer

BUT how do u use imgburn??? This is where im havin mad problems. I decompressed the file on MagicISO and now Im tryin to burn it on Imgburn. What am I doin wrong here people?

Okay people need ur help big time. I am usin MagicISO and it will not let me burn it with the Trial version so I had to decompress UIF the file and it reads 7.92GB. After thats all said and done how do I convert this file to an ISO and how do I burn it in Image burn???

And lets say I use Roxio 9 to burn this, would I select Data and then Data Disc???

What do you guys think of this DVD Dual Layer brand to burn the disk?

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3285647&Sku=M200-1242

Yes I must know what disks are recommended for burnin. Dual layer +R or -R???

Even tho I need the east coast, Thanks Allsound. Nuff respect my friend

Ok now we need to get an East Coast Disk!!

East coast, East coast, East coast, East coast, East coast,East coast

I must ask tho, what happend to the east coast disk for us east coasters??? Why only the west coast?

Ok I gave him a login to my ftp, he said at 5pm pacific he will start the upload to me.

 

When this is done, I will throw it up as a torrent. unless you guys would rather me use rapidshare and break it down into an .rar.

 

Let me know what works best for you.

I would like to know even if I download this WEST coast disk will it still upgrade the system??? Then again whats the point if Im in the east and this is a west coast disk???

Well doesn't that suck the bag??? Im from the east coast and now Im outta luck. DAMMIT!!!

sorry was gone this weekend, the disks i have are from the n5 unit. i tried them in my d3 and they update and work fine. no visual differences from how the d3 id currently.

Soooo I take it u gonna be the hero and get them discs up on Torrent already correct??? Save us, save us all and get them uploaded and THANK YOU VERY MUCH

The pioneer site says the N5 comes with the old ones. These are the old ones right? The red ones are the old and the green ones are the new I'm assuming. Here is a link to the N5 specs that say what disc they use. I'm I completely wrong here?

 

http://www.pioneerelectronics.com/PUSA/Products/Navigation/In-Dash/AVIC-N5?tab=B

Here are the SPECS from the Canadian site.

http://www.pioneerelectronics.ca/POCEN/Products/Navigation/In-Dash+Navigation/AVIC-N5?tab=B

Torrent upload...

 

now Coming in September!

That is sooo true... When September comes through it will then say October lol... I think that ski mask is comin down and Best Buy will be gettin JACKED for an N5 jus for the map lol