koko93s

SOLVED Easiest place I found to tap into this: Passenger side kick panel. Remove it, exposing some connectors. The orange wire on the light blue connector is the reverse indicator. Works great on my system. Jason

SOLVED this! Okay, so I never got a response here or anywhere else so I delved into the wiring myself. There are 3 wires that makes up the camera feed from the rear of the vehicle here is where they are and what I did to feed them into my Head Unit. ---- I removed the side pillar covering the front driver's side Side Airbag. If you can't get the panel off, flip up the SRS logo on the molding from the bottom edge with a knife to expose an 8mm bolt. Remove the bolt, then the molding. Drop the roof console that contains the map lights/garage door buttons. There are two screws

Hi! I just installed a Z130bt into my vehicle with the parking brake bypass. This mod seems to be working perfectly. However, I can turn the car off with the volume at 20, when I turn the car back on it's at a low level like 3 or 4. Is this normal? It's not a game changer but it is kind of annoying to have to raise the volume every time I get in. Thanks! Jason

Hi! I have an Avic Z130bt and I want to try to wire my factory reverse camera into the unit. I have a 2011 Honda Pilot EX-L (no nav/res) with the backup camera. The camera currently displays in the corner of the auto-dimming rear view mirror. I'm wondering if anyone know what wires in the mirror harness correspond to the video +/- in order to wire them to an RCA connector. Any help would be appreciated. Thanks! Jason

Hello, I'm looking for information regarding the location/color of the nearest reverse wire to Avic headunit on a 2011 Honda Pilot EX-L (no nav/res). Any help would be appreciated, Thanks! Jason