4n1m4l

Hi Pistillo, I had the same problem with the switch backgrounds as you have. I just restored the 2.45 firmware as you suggested using this thread: http://avic411.com/index.php?/topic/33495-downgrade-firmware/ You have edit the mpu.bin with a texteditor like notepad and set the version from 2.45 to 2.46 e.g. Good luck!

Hi yonel, I think the microsoft technical issue you mentioned, do not apply to our problem.. Cause there is no sound-device available. Ok, to get back to my own checklist. I went in to Win CE system properties and found out the mips proccessor is probably based on a AMD Alchemy SOC. http://developer.amd.com/documentation/articles/pages/616200624.aspx . Looking at the usage description on that page, the type we have is probably the AU1500. Google brings me to: http://datasheet.elcodis.com/pdf/49/42/494222/au1500-500mbd.pdf That datasheet tells me, that a ac97 controller should be av

yonel, I'm on the versions you mention. The only difference is the timesync, so I'm gonna check this today. For the sound, we probably have to check first if there is a sound device available for Win CE. I think the radio is a different device controlled by some parameters from the Win CE app. Also the iPhone sound out is directed to the radio's output. The volume is controlled by a device that also is controlled by some parameters from Win CE, that's the reason the volume buttons allways direct respond. Those are my thoughts about it, I don't have any evidence for it.. yet So a l

Hi Everyone! Two days ago I decided to buy a Appradio , this morning I decided to install the Appradio Plus software and Igo 8 and it works like a charm! So keep up the good work everyone! I also found out I have the latest 2.45 version and I'm running into the Time issue. It looks like the time will reset when the radio is shutdown and booted up again. Then the time in Win CE is reset to Jan 2009 12pm or something like that. But, so far so good! Greetings from the Netherlands!