hdsportguy

Hello everyone, I just had an AppRAIDO 3 installed in my car to be used with an Iphone 5. I have all the correct cables and everything is hooked up correctly. The only issue I have is when I connect the iphone 5 the Ipod app on the radio is grayed out. Is there a setting I've missed? Am I the only one with this issue? I did do a search and didn't find any information on this. Can any one help me with this. Everything else on the radio is working as is should.

Would some one from this tread be willing to put one of these together and program it and sell it to me for a fair price? I am more than willing to pay for parts your labor time and shipping. Please email me at: jfuson97@gmail.com and let me know the total cost. I can pay through PayPal or send you a money order.

Thanks In Advance For Your Help,

James

As far as SiriusXM goes it might be a little harder than you might think......Case & point with AR and AR2 you can't do bluetooth streaming which is the norm for the IPhone and SiriusXM. When using the doc cable I always get somekind of conflict which stops the app dead in its tracks..I have not figured a way around this yet.

Hey Mike, Can't wait for APP EX. 2 to show up in Cydia. Can you give ua all a hint at you time frame.

Thanks again for all your hard work!!

Yes, I get the same thing with Navigon........Strange.

I have an AR2, just did the jailbreak for 4S IOS 5.1.1. Then installed App Ext. I can add any app to the AR2 menu screen but the touch screen function doesn't work........Really wanted this to work with Navigon. Anyone got any ideas how to fix touch? Did I miss something?

Thanks

Have you tried disconnecting your car battery for a minute or so to reset the radio?

I have a question for all the forum members. I have the Pioneer AppRadio 2 and it has never displayed the "AppRadio Welcome Animation". Other than that I'm very happy with the radio. My Question: Is there a way to turn this on and off, or a way to trick the AR2 into playing the animation? What am I doing wrong?

Thanks for any help on this.

You will also need a mounting kit that fits your car. Also if you want video in motion you will need the switch that was talked about.

Found It.

I'm all about a donation to help on this project. Does Mike have a PayPal account?

Just let us know.

The update sez: Now compatible with additional Pioneer multimedia recievers.

New app Icon and user interface

Minor bug fixes.

Not sure yet what the minor bug fixes are yet.

Yes,AppRadio first and secound gen have GPS antenna's to help with the NAV apps. Depending on how it was installed the antenna could be mounted in the dash (behind the radio).

Since you got it off EBay, you will need to contact Pioneer. I don't know of an aftermarket video cable that works 100% with the appradio. Just tell Pioneer your AppRadio model and that your Iphone audio\video cable has broken. You may be able to get another under warrenty I you Ebay guy is an authorized reseller. But chances are you will have to pay for it.....

It will fix your white screen.........Good luck.

A friend of mine has a 1st gen in his Challenger. I did this on his and it worked. In this order.

Start your car and your AR1, wait about 15 seconds.

Start the Pioneer AppRadio App on your Iphone and connect the cable. Wait on the AR1 and Iphone to sync up.

Click allow on your Iphone

Tap the App Icon on the radio. Then open YouTube on your Iphone.

Now unplug the cable to your Iphone then plug it back in, and click allow.

If you need to, tap the app icon on the radio again.......at this point go back to YouTube on your Iphone and start your video

Click allow again if ask, your video should start.

I'm also wondering if the pictures in your camera roll show up on your Radio screen when you go into the pictures on your AR1?

If they do, you can play any movies you have on your phone from here.

Just move any movies on your Iphone to your Camera Roll, Go back to the Pictures app on your AR1. Click allow on your Iphone.

Then tap the movie on the screen of your AR1 the movie will open. Tap the Play > arrow on the screen and the movie will start.

These were the steps on my friends setup. This should work for you. The order on your setup might be slightly different. Anyway this should work for you, unless you have a bad cable. (you must use the cable that came with the radio to play videos, no extention cables).

I hope this helps.

Your cable may still be under warrenty. Contact pioneer about a replacement. If you got it at Best buy with the extended warrenty just take it back in to them and get it replaced.

OK, Which AppRadio firmware do you have on !st gen. Which Iphone and IOS do you have? Is your Iphone jailbroken?

Just a quick note, Built in mirroring is only included on the Iphone 4 and 4S.

We will get it working, don't worry.

Anything is possible when it comes the firmware upgrades. But here is the thing. If an upgrade comes out that doesn't add a feature I need or fix a bug I'm having an issue with I don't have to do it. Also I went with the relay at the time because it is hidden and I wanted a clean install.

If for some reason the relay stops working on my setup, I'll start using the button some other people are using and try to hide it in an easy to get to place.

It really comes down to what works best for you, there really isn't any right or wrong way to add your bypass feature.

I have a 4S IOS 5.1 not Jailbroke.

It is working perfectly on my APPRADIO 2 (SPH-DA100)

I'm just wondering, you can't play videos in motion, or you can't play videos at all?

I have the 3 wire relay bypass on my APPRADIO 2 and it works great. This is what I do to play videos:

On your phone open Netflix or YouTube and start the video. (Netflix and YouTube both have built in Mirroring, so this will work without making any setting changes on your phone)

Then from where ever you are on the AppRadio go to the home screen and tap the Apps icon. Don't touch anything eles on your radio.

When it comes up on your phone, tap Allow and in just a couple secounds the video will start playing on your AppRadio screen.

If your relay is wired correctly, the video will continue to play once your car is in motion.

Sorry about the long post, but I hope this helps.

http://www.ebay.com/itm/Pioneer-APP-Radio-Automatic-Bypass-/180766014619?pt=LH_DefaultDomain_0&hash=item2a167e7c9b

This is the link to the $10.00 gadget.......and again it works perfect for me with my APPRADIO 2.

The only real issue I've had with the AR2 is the screen blackout linked to Pandora. I think this is actually a Pandora problem and not the AR2. I haven't noticed this problem with any other app.

The AR2 also seems to work much better if I start the car and turn on the AR2, then start the APP Radio APP on my Iphone and then connect the cable.

I also purchased the $10 gadget on Ebay to enable video in motion, this works great with no issues at all.

For what its worth I have a 4S with IOS 5.1 NOT jailbroke. And all the other APP's that I've tried have worked great for me.

What are your latest issues with the AR2?

Pioneer has a disclaimer out saying it is not responsible for any damage to IPhones........Just a FYI.

The reason I wanted to know is because spec wise the differences between the Appradio 1 and 2 are Screen size, "2' is larger, "2" has two set of RCA outs instead of just one, and the "1' has a SD card slot and the "2' does not, the "2" has a 5 band EQ and the "1' has a 12 band EQ. Other than those four differences the specs are the same. I was wondering if the "2" was running the same fimeware as the current version on the "1". Do you know if it is? Do you know the version of the firmware on the "2:? Do you know how to find it on the radio? Thanks for any help you can provide.