1lowgrk

AppRadio SPH-DA02 users: **This is to reiterate and combine all the information gathered throughout the last 14 pages. Listed below is the wiring for the Relay & TR7 along with step-by-step instructions on how to program the TR7 for feature #12: Relay Wiring: 85 - Blue wire on the TR-7 86 - White and Orange wire from the TR-7 87 - Tied to 86 on the Relay 30 - Green/White (Parking Break) wire on the Pioneer Control Line Wiring Harness TR-7 Wiring: Red - Yellow Wire (Constant Power) on Vehicle Wiring Harness Black - Black Wire (Ground) on Vehicle Wiring Harness Green - Re

It all depends on which model you have determines which feature on the TR7 needs to be programmed. Edit: feature #17 is not listed in the programming manual but if you read throughout the thread it's discussed how to program it for feature 17, only works for AppRadio 2 which I believe is the SPH-DA100 from my understanding. If you have the SPH-DA01 or SPH-DA02 you need to program it for feature 12 with a relay as discussed in previous posts.

I also have an SPH-DA02 and I programmed and wired the TR7 to feature 17 but only works when I turn my ignition on/off a few times, I know it's programmed properly since I used to work with these quit a bit in the past when I was installing Tommyb9999 did you use feature 12? 3,5,7 secs? Thanks in advance!