Jump to content
AVIC411.com

tackyevo

Members
  • Content Count

    9
  • Joined

  • Last visited

About tackyevo

  • Rank

  1. Sorry about that! I had a bad ground with the mute and parking brake wire.
  2. Did the bypass. Move the mute wire one up then grounded it along with the green parking brake wire. The problem is... My Navigation does not work! The GPS is forever wandering off on the screen as if my vehicle is moving but it's not following a specific route. Any ideas what is causing this?!?
  3. Help! I tried to do the bypass and now my NAV isn't working...it's forever wandering off on the screen!!! Any ideas? The unit is connected to a mito-02 harness for lancers. The green parking brake wire was previously connected to another green wire from the mito-02 labeled left right positive. What was I suppose to do with that wire after?!?
  4. That's awesome! Thank you. I'll turn those knobs to max and ask the wife if I can buy the PAC. Does the PAC lag when using steering controls while on BT? The metra doesn't.
  5. Awesome!!!! Thank you!!!! I'll adjust the two blue knobs. Shouldn't the Axxess ASWC be the same as PAC audio? I have the axxess aswc and it works. Only problem is when I'm playing music via BT, I can't skip songs using steering controls. It works flawlessly other times i.e. when iPhone is connected via cable and using the BT feature for phone calls.
  6. Thank you for the response! 1) I'm not able to skip songs via using the steering control while listening to music via BT. 2) The mute wire is yellow correct??!? Im not really sure so I'll have to double check. I didn't do the bypass though until just a few minutes ago! So I have to reopen it anyway. Would you like me to take a picture of my wiring when I open it back up?!? Do you think it has to do with the mito-02 harness? I think there's two blue knobs that you can adjust?! If I don't do the nav bypass, where should the mute wire connect to?!?
  7. Installed the x940 on my 2012 lancer evo. I needed to buy the mito-02 in order to retain the factory rf amp and also installed the axxess aswc. I have a couple of issues which I don't know the fix to... 1) when iphone5 is connected via bt while playing songs, I can't use the seek control via steering control but I'm able to use it on radio and if iphone5 is connected via cable 2) The NAV volume is way too low even though I have the volume maxed out under sound settings! The same goes with phone call via BT. The volumes are way too low. Any ideas?
  8. Hey guys! I just finished installing the x940bt on my 2012 lancer evo along with the mito-02 harness for rf system and the Axxess ASWC. I had to manually program the steering control because when it auto detects it, my buttons were switched around! Well anyways, my problem is...If my on the FM mode I can press vol +, -, seek next, previous but once I'm in Bluetooth mode listening to music from my iphone5 the seek controls do not work! Vol controls still works and during a phone call I'm able to pick up and hand up with the steering controls. Just have problem with the Bluetooth seek contr
×
×
  • Create New...