Jump to content
AVIC411.com

louiea

Members
  • Content Count

    61
  • Joined

  • Last visited

Posts posted by louiea

  1. My brother installed a 7100 into my car while he had it and he just gave the car back.  I noticed a speaker going in and out, so I pulled it out to see a bad solder.  
     

    In doing so, I noticed he cut off all the RCA inputs for the amp.  Would a repair shop able to re-install these or just get a new unit?

    2009 Volvo S60 with harness/adapter from Incartec in UK.

  2. I have purchased two 8000Nex, one was brand new and the other was a refurb, both from authorized retailers.  The refurb started acting up by freezing all the time and then rebooting itself, the brand new one operated fine up until the screen moved to eject mode and became completely unresponsive.

     

    I have sent both back under their warranties and the only thing they did on both was update the firmware; both units have been reinstalled and are suffering the same exact problems after only a few hours.

     

    I've owned a D3, F90BT and a 7000NEX with no issues.

     

    Anyone have any thoughts or input?

  3. Recently installed an 8000 into my 07 Volvo XC90. 

     

    Was working fine, but I was out driving about a hour after I completed the install and it restarted twice, but then stayed on the entire time for close to a hour with no issues.

     

    Today, it was restarting like it had been but after one of the restarts, it stayed on the Pioneer loading screen with the audio still playing in the background.  I pushed the reset button and it stayed on the loading screen, with no audio.  It also sometimes tells me that the handbrake is connected improperly and some times it doesn't.

     

    I have the parking brake lead grounded, along with a parking brake lead (negative) on the harness.  The VSS wire is also connected.

     

    I soldered and used heat-shrink tubing, so my connections are solid.

     

    Any help out there?

  4. I have a Pioneer AVIC-7000NEX that I have installed in my vehicle since November, about two months ago I started to get a constant "Check Antenna" message when listening to Sirius.  Everything appeared okay, but I still decided to replace the SXV with another one, now two days after putting in the new SXV I'm getting the "Check Antenna" message again.  It worked fine for two days, has anyone else had this issue?

  5. also the F90 usea same wires with all F series

     

    The GPS uses a different plug between the F90 and D3...

     

    Also, might be a stupid question, do I need the RCA harness to run the system and does anyone have any experience with the iPod cables that say they work with the iPhone 4S?

  6. My Sirius was working fine yesterday and when I went to leave work it said acquiring signal and didn't change. I called Sirius and had a signal sent to my car and it turned on for about 5 minutes and then stopped functioning again. I'm a little bit lost as to what might be going on. I didn't know if anyone else had an experience like this and if I need to possibly replace my Sirius box.

  7. Has anyone looked into adding logos for Sirius/XM Channels? Any direction on going through this, I have an SD Card already with files for the F90, so it would just be adding the graphic files and changing file location, I assume?

  8. Have the opportunity to upgrade from my D3 to the F90BT, just wondering if this is a good decision and will my Sirius box switch over?

     

    My D3 has been starting to give me some issues, the disc drive is starting to become very loud and the navigation has frozen on me several times.

     

    Any guidance or opinions would be appreciated.

  9. I'm looking to upgrae my stereo system. I have a Pioneer AVIC-D3 as my headunit and am going to replace all of the speakers and add a pair of 6x9s to the rear deck, giving me 8 speakers total. My questions are what kind of amp would I need and as far as speaker brands go, what is recommended? I currently have Infinities and I'm just not impressed. I need pairs of 3.5", 6.5", 5.25" and 6x9".

  10. I'm having a hell of a time to get the damn thing to burn. I've gone through three dual layers already and hate to keep burning through them. I'm using Memorex DVD+R DL and they just seem to quit anywhere from 20% to 75% using Alcohol120%. I've been trying to keep up with the thread, but have fallen behind, could someone sticky a burning solution or would someone be willing to burn me a copy and I've cover your expense of the disc and shipping.

×
×
  • Create New...