brachoza
-
Content Count
48 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by brachoza
-
-
find the factory sat radio box, unplug the antenna and remove the palstics housing around the connector and plug it into your pioneer box.
-
what vehicle? and it depends on the manufacture of the harness you are using. in a metra harness there are 3 orange wires
orange is ilum (doenst dim with ip lights)
orange/white is dimmer positive (dims with ip lights)
orange/black is a negitive dimmer (special function most foriegn) -
-
keep up the good work
-
-
yes you need the hideaway box the is the gui interface controller
-
american international makes a double din dash kit for you
hon-k836 is the item #
and you need an antenna adaptor. -
the dvd player is only controled by the factory radio can bus data wires. there is no bypass at the moment at this time.
-
your vehicle has a powered antenna module that need the orange wire at the factory radio harness powered. if the installer used a harness plug you should use the blue wire at the connector (power antenna) and connect that to the blue wire at the back of the radio (power antenna control wire). they probably looked at your car and was like there is no power antenna so we dont need to connect this wire. most foriegn car are being built this way. if you need more help just email or pm
-
what type of vehicle
-
is the 06 the same as the 05 and what engine do you have turbo or non
-
with a bose system in a gm vehicle there should be some type of bose badging some where in the vehicle. If not, you can call your local dealership and give them your vin # and they can tell you what your vehicle was equiped with. are you looking at the soundgate, metra, pie, or pac pieces.
there are two things that matter with your vehicle. amplified or non and onstar. those are what matter. -
i used to work for CC a few weeks ago. I was the Roadshop Manager. one thing i would have fired them on the spot. Violation of company policy.
second, dumb ass installer, would never hired them. now if they brought in the bypass from ducatiboy we could install that outside. not in the store. on the installers off time. -
i also have very great knowledge of vehicle wiring
-
if you are looking for the z or d's to be installed then you have to make a custom dash kit. there are many dash kits for a single din. the metra 99-6504 for a clean flush look. and a metra 99-6505 if you plan to install a different radio with a flip down face. the 6504 dosnt allow the face to fold down all the way.
-
the guide speaker is a stand alone speaker just for guidance. if you dont ue that speaker you can set up the z1 to paly the guidance voice over the factory front speakers left, right or both.
-
that would by fine, but every vehicle is different. that would could take up alot of the admins website space. for example the ford escape has a vss wire at the radio if you have the limited only and 2 different places if you have a different trim model. that is why people can email or pm me for the wire info.
-
no they need to be on the glass. hiding them will reduce receiption greatly
-
if you have the radio with a subwoofer the wire is in the radio harness. its not the main radio harness but a second harness just with 2 wires or it my just have the 1 wire depending of the vehicle trim model. the color is gray with a black stripe.
or
pin 68 gray with black stripe on the 3.0l engine pcm which is mounted to the passenger firewall in the engine bay. the big black connector rigth under your windshield
or
pin 28 gray with black stripe on the 2.0l engine pcm
or
pin 3 gray with black on your cruise control module on the right side of the engine bay -
if anyone needs vehicle wire info or component locating you can pm me or sent an email to Brachoza@hotmail.com. I been in the car audio and security business for over 15yrs. and have alot of custom build under me.
now question is a stupid one. the wrong wire could cost you hundreds or even thousands.
This service is going to be free for the time being. in the future i my add a fee per page. just a thought -
the wire color is green with black stripe or green with orange stripe, this wire is located at the bottom of the fuse block in a white connector where the wires exit out toward you.
-
according to mitchells on demand
the motor control unit in the engine compartment. Pin 82 which is a gray wire is one of the 2 wires. And pin 90 which is a blue wire is the other one. It doesnt state which one is the signal or return. try one if that doesnt work try the other one. If it has the resistor cap at the end of the vss wire (from the avic#) leave it on there
N3 Green Wire Ground
in Hacks/Mods
Posted