trentstout23

i hooked the light green parking brake wire into the ground on the radio harness and everything seems to be working fine now.

ive tried avic411.com with no response and tried contacting pioneer with no response as of yet. i just got it installed and im having some problems. i cant access anything with the navigation or the settings of the head unit. everything is "grayed out" and unclickable. gps is hooked up and mounted on dash. it shows my location on the screen but i cannot change anything. below are some pictures of what i am trying to explain. things i added, changed or didnt use: im using aswc-1 and everything works fine. i did not hook up the microphone i hooked up a parking brake

i did this parking brake bypass. could this be the reason? my settings menu is the same way with most of the settings "grayed out" so i cant click on anything http://www.amazon.com/Parking-Override-Bypass-Automatic-Pioneer/dp/B008I5S4AW/ref=sr_1_2?ie=UTF8&qid=1368028076&sr=8-2&keywords=parking+brake+bypass+avic+x940bt

just finished installing and everything works except navigation. i mounted the antenna on the dash. it shows my location but i cant access the menu to input an address. its installed in 2013 tacoma. i didnt hook up the pink wire(car speed signal input) or violet/white( reverse gear signal input) wires. i read on here that everything should work fine without these two wires hooked up. i cant click on anything nav-related because its not lit up on the screen.