cs209102

this is a pic from my colorado forum and the circled pin is the one they say is 25 but i dont count that to be the 25th hole counting any direction

i have no way of knowing for sure without breaking the harness apart, there arent even any discernible numbers to know which pin is which. Thanks for the info, ill poke around tomorrow and look for a light green wire.

does your source show any info for a light green wire on that plug?

i just read in a colorado specific forum that someone in an '06 found their vss wire to be a solid light green wire coming out of the blue harness, any chance the yellow/black is only for '04-'05?

yeah thats the wire, there are 2 yellow/black wires coming out of the blue harness and the other just gave a single pulse each time the trans was put into gear. what i dont understand is why it would read 0 mph, as i drive my position on the map changes and im able to navigate with "OK" accuracy but i want all that i can get out of it. it is bypassed so it shows the parking brake as set if that matters?

well i reset all 3 things but it still gives the irregular pulse warning, got up to about 40mph and the pulse was about 300, and now for some reason everytime i turn it on it gives me that damn store demo "press OK to start navigation" screen. it still show me at 0 mph and doesnt count the distance anymore

thanks, ill go try it right now!

ive hit the reset button by the eject button, is there another reset? im scouring for it through my owners manual as I type this

Starters: great site with tons of help, used this site to guide me through my install of a D3 in my '07 chevy colorado. The Problem: i installed my D3 a few days ago minus the vss wire, of course the speed pulse was reading zero but the distance, left turn and right turn were "learning". now that i have my vss hooked up, it ramps up and down with acceleration/deceleration, it keeps counting the pulses it recieves in the 3D calibration window but it went from "simple hybrid" to "sensors initializing" and when i go to connection status after i hit 30 mph or so it gives the "irregular spee