VirtuousE

Happen to me....use super glue and relieved the tension off the wire

Just wanted to let folks know the wire is located in the drivers kick panel...you will have to pull the carpet back to tap into the wire...the plug is on the side of the fuse box...no need to run the wire from the trunk of the car to the front of the car....see pic below:thumbup: this should help folks with future installs the wire is black and red...tested several times with test light...signal is live while in reverse and dead while in any other gear...

where is the that 20 pin plug located? I'm having a hardtime finding it thanks

Thanks...I could not find that wire on the list! GS300 1998 -2003 Requires 791 Bypass Module and extra Ignition Key PART COLOR LOCATION DIAGRAM 12 VOLT CONSTANT WHITE/BLUE (+) IGNITION SWITCH HARNESS STARTER BLACK (+) IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 BLACK/YELLOW (+) IGNITION SWITCH HARNESS IGNITION 2 BLACK/WHITE (+) IGNITION SWITCH HARNESS IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 BLUE/YELLOW (+) IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 N/A KEYSENSE YELLOW (-) IGNITION SWITCH HARNESS PARKING LIGHTS ( - ) RED/YELLOW (-) UNDER STEERING COLUMN PARKING LIG

Fellas. I need help finding the reverse signal wire location on a 2002 Lexus GS 300. Can someone point me in the right direction? Thanks 'E'