Creef412 Posted July 31, 2006 Report Share Posted July 31, 2006 Does anyone know 100% that the mounting sleeve/cage/holder for the avic-n2 is the same as for the n1 or n3. The reason i ask is because pioneer has the n1 and n3 listed as the same model but the n2 is a different model. i need a cage for the n2 but can't seem to find one anywhere so i wanted to see if one of the others would fit in it's place. Thanks, Creef412 Quote Link to post Share on other sites
executioner Posted August 1, 2006 Report Share Posted August 1, 2006 It will work with any cage it just wont screw down with the tiny screws on the front. Quote Link to post Share on other sites
Passat 05 Posted August 1, 2006 Report Share Posted August 1, 2006 I was unhappy that the Z1 came without a sleeve and tried to get one quickly without luck. Having installed the D1 with a sleeve I couldn't think of any other way to mount the navi into my VW passat. Well I'm glad I didn't find a sleeve because it turned out I found a better and more secure way to install the Z1 and it took less than an hour to do the mechanical part of the install and without the sleeve there is also better air circulation. :idea: Quote Link to post Share on other sites
Creef412 Posted August 1, 2006 Author Report Share Posted August 1, 2006 [quote name="executioner"]It will work with any cage it just wont screw down with the tiny screws on the front.[/quote] so is that a definite not gonna fit, or is that worst case senario? Creef412 Quote Link to post Share on other sites
executioner Posted August 1, 2006 Report Share Posted August 1, 2006 It will fit. I slid mine into a JVC and a sony bracket and it fit fine. It is just not going to be latched in but those 4 tiny screws arent going to help much anyway. It fits tight enough that it will not easily slide in and out. Quote Link to post Share on other sites
Creef412 Posted August 2, 2006 Author Report Share Posted August 2, 2006 i sliped it into my jvc cage last night and it was a pretty tight fit, not perfect but i'll take it. Thanks, Creef412 Quote Link to post Share on other sites
jimmy303 Posted August 11, 2006 Report Share Posted August 11, 2006 If any one needs sleeves for the Z1, the one from the D1/2 will work. I have about 30 of them laying around the shop. I may have a few N1/2/3 sleeves around, also. Quote Link to post Share on other sites
Darth Volkswagen Posted March 8, 2007 Report Share Posted March 8, 2007 [quote name="jimmy303"]If any one needs sleeves for the Z1, the one from the D1/2 will work. I have about 30 of them laying around the shop. I may have a few N1/2/3 sleeves around, also.[/quote] I know this is a pretty old post, but just wondering if you have any of these sleeves form the D1/D2 laying around still? I'm also wondering if you know whether the D3 will fit these sleeves? TIA. thad. Quote Link to post Share on other sites
bmuhlfeld Posted March 8, 2007 Report Share Posted March 8, 2007 is there a double din sleeve for the d3? Does it come with it or i Have to go buy one? Quote Link to post Share on other sites
Darth Volkswagen Posted March 8, 2007 Report Share Posted March 8, 2007 [quote name="bmuhlfeld"]is there a double din sleeve for the d3? Does it come with it or i Have to go buy one?[/quote] It doesn't come with a sleeve. I am trying to find out if the d2 sleeve will work woth the d3. thad. Quote Link to post Share on other sites
cntrylvr79 Posted March 8, 2007 Report Share Posted March 8, 2007 Yes it will. There's brackets that screw into the sides of the avic. Then those backets screw into the cage. I belevie the part number for the cage is adt-va133 or something like that. Quote Link to post Share on other sites
jimmy303 Posted March 10, 2007 Report Share Posted March 10, 2007 Unfortunately, the move from my old shop left a lot of things in various voids. I have no idea where those sleeves went. Quote Link to post Share on other sites
bobmun Posted March 10, 2007 Report Share Posted March 10, 2007 [quote name="Darth Volkswagen"] [quote name="jimmy303"]If any one needs sleeves for the Z1, the one from the D1/2 will work. I have about 30 of them laying around the shop. I may have a few N1/2/3 sleeves around, also.[/quote] I know this is a pretty old post, but just wondering if you have any of these sleeves form the D1/D2 laying around still? I'm also wondering if you know whether the D3 will fit these sleeves? TIA. thad.[/quote] try here [url=http://www.avic411.com/forum/viewtopic.php?t=4895]http://www.avic411.com/forum/viewtopic.php?t=4895[/url] Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.