afgoody Posted February 29, 2008 Report Share Posted February 29, 2008 So, the D3 installation guide says "Never feed power to other electronic products by cutting the insulation of the power supply lead..." how/where do I get power for the Bluetooth (CD-BTB200) and XM (GEX-P920XM) modules? Quote Link to post Share on other sites
SuperH Posted March 1, 2008 Report Share Posted March 1, 2008 So, the D3 installation guide says "Never feed power to other electronic products by cutting the insulation of the power supply lead..." how/where do I get power for the Bluetooth (CD-BTB200) and XM (GEX-P920XM) modules? I ignored that. But, anywhere you get constant 12V, you can get your power source. Fuse box? Quote Link to post Share on other sites
afgoody Posted March 1, 2008 Author Report Share Posted March 1, 2008 So, you have a bluetooth and XM hooked up through the yellow cable that goes to your AVIC? What did you use to splice? Quote Link to post Share on other sites
BuffaloSS Posted March 1, 2008 Report Share Posted March 1, 2008 I bought some crimp connects for my install...just need to do it. I've got the same pair that need to be installed, and planned to just tap into the power from the HU. Finding a good ground, though, is gonna be a PITA. I don't want to pull up my carpet. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.