sobo Posted March 24, 2008 Report Share Posted March 24, 2008 I have a D3 recently installed in an 06 xterra. Half of the time when I start up my truck, normally in the mornings only, the nav system starts up by saying checking disc, than it tells me to eject the disc and insert the proper disc. Problem is that I have 2 east coast nav discs and both of them have the same problem. The music will play, but the screen is stuck on the error message. after an hour or so of starting up the truck and turning it off will it go back to the regular start up screen. I have tried resetting it and it doesnt help. Its almost like the truck needs to be warmed up for a little bit for it to work correctly. Tweeter installed it. Please help. Also, I cant seem to get the sub to work, even though the sub output is on and the rear speakers are set to full with a subwoofer in the pre out??? Quote Link to post Share on other sites
BuffaloSS Posted March 25, 2008 Report Share Posted March 25, 2008 Have you used the nav for long? Have you set your current position to your location? If you're on the east coast but haven't set your home position to east coast, it will go by the default location in California. Not sure of the sub issues. Quote Link to post Share on other sites
sobo Posted March 25, 2008 Author Report Share Posted March 25, 2008 That sounds like it might work, I have only had the nav for a week or two and the last time it worked it had me marked in the wrong area of the numbered map...Unfortunately I dont have the west coast disc, which I probably need to get into the system to change over to the east coast side. Quote Link to post Share on other sites
BuffaloSS Posted March 26, 2008 Report Share Posted March 26, 2008 Just insert the EC disc, then select "Modify Current Location" or something like that, and then drag the crosshairs from LA all the way over to your east coast location. I've never inserted the WC disc, iirc. Quote Link to post Share on other sites
cntrylvr79 Posted March 27, 2008 Report Share Posted March 27, 2008 Factory sub or aftermarket? Quote Link to post Share on other sites
sobo Posted March 27, 2008 Author Report Share Posted March 27, 2008 JL8w7 powered by an xtant x1001...amp powers up and and the D3 is set for pre out sub and rear speaks full range and sub is turned on in the unit. I am fairly experienced with this and it just doesnt make sense Quote Link to post Share on other sites
remy Posted April 18, 2008 Report Share Posted April 18, 2008 Did this work for you? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.