valparaiso63 Posted April 2, 2008 Report Share Posted April 2, 2008 just switched original radio X avic-d3, where i find the accesories power conexion, original radio stay on without the key until i open a door or 15 minutes after key off,, now either kive radio w/power all the time or conect a external switch to turn that off, vss cable at BCM, have 3 green and 1 green/white at the plug, wich is the position of the righr one? Thanks valparaiso63 Quote Link to post Share on other sites
xsdbs Posted April 2, 2008 Report Share Posted April 2, 2008 what interface module did you use? to get the radio shut off right after ign is shut off, just run a new wire to the ign switch wiring and tap into the brown wire, that will provide power in the acc & on position. the green wire should be at the radio harness, if you had auto speed compensated sound control on the factory radio ps, your grammer need a little work, not being mean but...... Quote Link to post Share on other sites
valparaiso63 Posted April 3, 2008 Author Report Share Posted April 3, 2008 Thank you, i wll work on my installation on saturday and on my grammer the rest of my life, english is not my primary lenguage. Thanks again valparaiso63 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.