JSG517 Posted April 30, 2008 Report Share Posted April 30, 2008 This is confusing so stay with me I have connected the D3 to Sirius SIR-PNR2 to BTB-200 and both remain grayed out on D3 unit. I am sure it is connected properly; I even tried switching around the cables and units to no avail. I checked fuses and grounds, no problems. If I connect the SIR-PNR2 alone it works sound and all, now if I connect the BTB-200 alone I get nothing it is grayed out. Once I PROPERLY connect the BTB and SIR together everything is grayed out. BUT! Here is the tricky part if I improperly connect the SIR and BTB they light up as if they work but no sound from either. WON’T WORK: (SIR) black/out ==TO== blue/in (BTB) black/out ==TO==blue/in (HU) Or (BTB) black/out ==TO== blue/in (SIR) black/out ==TO==blue/in (HU) ___________________________________________________________ LIGHTS UP W/ NO SOUND: (BTB) black/OUT ==TO== blue/OUT (SIR) black/IN==TO==blue/IN (HU) NOTICE HOW IT’S (OUT to OUT and IN to IN) I have been trying for weeks now to wire and rewire the units together, am I missing a part that would allow the BTB & SIR to work together or could my BTB be bad. Any possible fix??? Quote Link to post Share on other sites
HarmsWay Posted April 30, 2008 Report Share Posted April 30, 2008 The first combinations should work. Either one of the IP-Bus cables is bad or the BTB-200 is bad. The BTB-200 has constant power? Quote Link to post Share on other sites
JSG517 Posted May 1, 2008 Author Report Share Posted May 1, 2008 Yeah constant power from 12v yellow wire in dash. If the ip-bus cables were bad would it allow Sirius to work? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.